#HyperLynx High-speed Circuit Design and Simulation (XI) Quantitative Analysis of Signal Overdrive and Underdrive##1. Reference Posts###[HyperLynx High-speed Circuit Design and Simulation (I) Transmis
Continued from the previous article: as followsThis register uses two bits:STEP_SEL: Select the setp_clk clock source.PLL1_SW_CLK_SEL: Select the pll1_sw_clk clock source.At this point, we can simply
After installing AD16, there will still be problems:
1. When you apply copper or delete a line in the completed PCB, the following dialog box will appear: And to delete a line, the entire PCB must be
[i=s]This post was last edited by w494143467 on 2021-6-14 17:00[/i]1. Introduction
After the communication protocol is defined, we need to start data communication with the sensor. First, choose the m