[i=s]This post was last edited by caizhiwei on 2021-1-19 22:17[/i]1. By utilizing the powerful functions of MDK5, FreeRTOS can be quickly ported.
First, open the Pack toolkit of MDK and check the Free
[i=s]This post was last edited by Tianyiwuzui on 2021-3-20 20:30[/i]After a few nights of hard work, I finally set up the ESP-IDF development environment. Now it’s time to get down to business: voice
1: The reference voltage needs to be accurate enough. It is recommended to use an external high-precision reference voltage.2: If the PGA is adjustable, the smaller the gain coefficient is, the lower
[i=s]This post was last edited by tsmt001 on 2022-4-27 16:16[/i]There is a three-pin A4G tube in the KA3842 switching power supply circuit. As shown in the figure, two pins are connected to the two en