I have set up the differential pairs and bound the minimum spacing rule to the differential pairs. However, when routing, the differential signal lines are automatically attached together. It is not a
The picture shows an LCD power supply circuit. Boosting 5V to 9.6V is a normal boost circuit. I would like to ask about the generation principle of +18V and -7.5V.
An example of troubleshooting a trigger failure on a Tektronix TDS7254 oscilloscope1. Instrument model:Tektronix oscilloscope TDS72542. Fault phenomenon:The customer reported that after the oscillosco
Abstract: This paper introduces the characteristics of the power supply used in teaching experiments, the single-meter method for automatic detection, and the novel over-current and short-circuit prot
I want to sample at the start and end of the effective vector of svpwm. The method I have thought of now is to use the ADC's s/w software trigger, but I don't know how to use the software trigger. How