A brief analysis of the transplantation of U-BOOt and MontaVista Linux - based on the MPC8270 development board-Embedded Development-EEWORLD

Recommended ContentMore

Open source project More

Searched by Users

Just Take a LookMore

Compile QT5.6.0
tar -xvf ~/imx6/4.1/gcc-linaro-5.3-2016.02-x86_64_ARM-linux-gnueabihf.tar.xz export ARCH=arm export CROSS_COMPILE=/home/linyn/imx6/4.1/gcc-linaro-5.3-2016.02-x86_64_arm-linux-gnueabihf/bin/arm-linux-g
How to consider and design ESD of RF modules?
Static electricity is harmful to most electronic products, and RF modules are more sensitive to static electricity. So how should ESD immunity be considered and designed for RF module products? Regard
【RPi Pico】Install MicroPython
[i=s]This post was last edited by dcexpert on 2021-1-25 17:33[/i]You can connect the Pico to your computer via USB and then drag and drop a file onto the Pico to program it. The Raspberry Pi Pico come
Can anyone recommend the DATASHEE for ATMLU308? I have searched on Baidu but couldn't find it. Thank you.
Can anyone recommend the DATASHEE for ATMLU308? I have searched on Baidu but couldn't find it. Thank you.
MSP430 serial port receiving program (using interruption)
Use the receive interrupt to resend the received characters. After each character is received, the low power mode will be exited, and the received characters will be resent in the main function./*****
Starting tomorrow: Follow the experts and challenge yourself to learn FreeRTOS in 21 days ~ win gifts + cash
I heard that iPhone 13 will add reverse charging function???
About the parallel and series resistors at OUT in the crystal oscillator circuit
Video animation: intuitive understanding of electromagnetic radiation
Single-chip microcomputer controlled xc1004 four-axis SPI motion control chip information

Trending Downloads

A brief analysis of the transplantation of U-BOOt and MontaVista Linux - based on the MPC8270 development board

Document Introduction