1. Interrupt-related conceptsInterrupt process-----------------------------------You are playing chess, and suddenly the phone rings. You go back to the room to answer the phone, and thencome back to
The FOC vacuum cleaner development kit is a low-voltage sensorless FOC development board developed using CMS32M5733. It supports sensorless FOC and single resistor control, and has fast startup, smoot
1. If the MCU has a serial port peripheral, plus a level conversion chip, such as MAX232, SP3485, it is an RS232 and RS485 interface.2. RS485 uses differential signal negative logic, +2~+6V represents
[table=98%] [tr][td]1.What is the function of the cut-off frequency parameter in the ST motor library? [/td][/tr] [/table] [img=419,0]http://www.ing10bbs.com/data/attachment/forum/201812/19/193031cfii
Only DIN and GND are used to drive WS2812. You need to make some changes to the light strip, connect a Schottky diode between DIN and VCC, and then connect a 10uF capacitor in parallel.From: https://g