cather user manual 1. Enter \"*#3646633#\" on the mobile phone to enter the engineering mode, enter the device options, set the first item in \"SetUART\" to \"UART1\", and the second item to \"UART2\". Connect the mobile phone and USB download cable to the computer correctly and start Cather: the main interface is displayed as follows: [pic] Note: When doing RF calibration, you need to change the UART port to the default setting! 2. Select the appropriate Database file: Database selects BPLGUInfoCustomAppSrcP_MT6225_S00_MAUI_07A_W07_28_MP_V5_F2 in the \\tst\\database_classb directory [pic] 3. Open the appropriate database file, select \"Loggingmode\" after confirmation, select the communication port, and select \"connect\" to connect. [pic] 4. Select \"connect\" to connect, and select the required Trace through Filter. [pic] (Note: Generally, the following items can be used to obtain the trace: COSTOM-DLLTASK, L4C, MMI, remove the first one for the secondary phone and replace it with PNP, for the phone book, take PHB, for SMS, take SMS, for Bluetooth, take BCHS) 5. The following is a set of valid traces: [pic] 6. Save the obtained traces to the computer [pic]……
You Might Like
Recommended ContentMore
Open source project More
Popular Components
Searched by Users
Just Take a LookMore
Trending Downloads
Trending ArticlesMore