If industrial robots want to avoid collisions in a large area ( brother, don't touch porcelain for no reason ), they need to be able to sense in all directions ( up and down, left and right ). TI mill
I designed a circuit using the TPS73033 linear step-down chip. When the load is disconnected, the output voltage is normally 3.3V. After the load is connected, the output voltage drops to 0.7V. There
[i=s]This post was last edited by alan000345 on 2020-1-15 08:42[/i]January 7, 2020 - Qorvo, Inc., a leading provider of innovative RF solutions for mobile, infrastructure and aerospacedefense applicat
Status Code Nature Error Interpretation
--------------------------------9000 Executed successfully6200 Warning information not provided6281 Warning return data may be wrong6282 Warning file length is
The GD32F310G development board is equipped with a 12-bit ADC, which can perform 6-bit, 8-bit, 10-bit and 12-bit data acquisition. The effect of 8-bit data acquisition is shown in the figure below.8-b