question:
"../Source/DSP2833x_SysCtrl.c", line 16: fatal error #5: could not open source file "DSP2833x_Device.h" . All header files have been included under include in the project directory, but the
Energy conversion systems inevitably have energy losses. Although 100% conversion efficiency cannot be achieved in practical applications, a high-quality power supply can achieve very high efficiency
The timing of ADS1251 and the corresponding time of each part are shown in the figure below. Is there anything wrong with the reading code I wrote?
double GET_DOUT(void)
{unsigned int temp = 0x0000000
Introducing a magic tool that can connect the power analyzer to the CAN bus network, the WT-CAN communication adapter: iDAQ-WTCAN. It is the small box in the picture below. With it, you can directly c
1. For the open source code of RISC V, you can access it from the link of this website, which summarizes various information about RISC V: https://cnrv.io/resource2. Install your own virtual machine o