This is the experiment the teacher asked us to do in the lab class.

This is the experiment that the teacher asked us to do in the lab class. I hope it meets your requirements. Thank you.

unfold

Recommended ContentMore

Open source project More

Popular Components

Searched by Users

Just Take a LookMore

PWM input capture, problem of selecting trigger source
I use CH1, CH2 and CH3 of TIM2 as input pins respectively. The trigger source selections for CH1 and CH2 are TIM_TS_TI1FP1 and TIM_TS_TI2FP2 respectively. But when using CH3, why is there no TIM_TS_TI
4.2V to 50V
4.2V to 50V
Introduction to RF Gain Blocks for Radio Range and Reliability
Radio frequency (RF) PCB design has many uncertainties in the currently published theories and is often described as a "black art". Generally speaking, for circuits below the microwave frequency band
How to choose pliers, terminals, wires, and heat shrink tubing for DuPont cables?
I bought dozens of silicone binding wires before, which are very useful, but after using them for a while, they are not enough. Some netizens suggested that I can use pliers to crimp the wires myself.
Talk about the "obstacles" on the road to power supply upgrade
From learning about power supplies to designing a power supply, from being a power supply novice to a technical expert...how many obstacles have you overcome along the way to becoming a power supply e
How to do switch detection in TWS headset design
FAQ｜Littelfuse Live: How to improve the safety and reliability of smart building electronic equipment in the era of the Internet of Things
How to measure the output ripple of a single-phase inverter with an oscilloscope
No color difference splicing screen
Analysis of optimization methods for overcrowded solder joints in PCB design

Trending Downloads