After successful initialization, the function aci_gap_create_connection is used to connect directly according to the address, but it returns 0x46 BLE_STATUS_NOT_ALLOWED. The connection cannot be succe
Problem/Goal and SolutionObjective: Only allow "high-level functions" to access data in OTP, other applications cannot directly read OTP contentExample @ F413-Nucleo, F401-NucleoTarget environmentThe
1 System Overview
As shown in the figure, this is the principle block diagram of the entire video acquisition system. At the beginning of power-on, the FPGA needs to initialize the register configurat
After learning that I had the honor to participate in the NXP Rapid IoT evaluation, I started to install the mobile APP. According to my previous experience, I chose to use my mobile phone to log in t