The EE55 wind speed switch is designed for standard HVAC applications and can set the switch point between 2…20 m/s. It uses E+E\'s innovative thin-film sensor based on the principle of hot-film anemometers. This sensitive element is famous for its excellent accuracy and excellent long-term stability over the entire operating range. In addition, E+E sensitive elements are less sensitive to dust and other factors than other anemometers, which means high reliability and low maintenance costs. The EE55 includes an integrated sensing probe and a relay unit suitable for panel installation. The electronic components are integrated into the sensing probe, which allows the cable length between the probe and the relay unit to reach 10 meters, thus ensuring that the measurement is free from electromagnetic interference. The low angle dependence and the telescopic tube allow the sensing probe to be installed in pipes with a diameter of 50…630 mm. The hysteresis time can be set between 20…100 seconds, which can achieve a smooth start of the instrument.
You Might Like
Recommended ContentMore
Open source project More
Popular Components
Searched by Users
Just Take a LookMore
Trending Downloads
Trending ArticlesMore