When power saving is required, how should the following configurations related to the LCD screen (1) SEG pin (2) COM pin (3) VLVD1-3 VLCDH be configured?1. YOU
2、OUT
3、ADS
4. PU pull-up
5. PD pull-dow
[i=s]This post was last edited by MianQi on 2021-8-9 22:00[/i]From "New" to "0 errors, 0 warnings.", you need to go through three installations, all of which are related to "SDK Manager":New:At this t
For more resources, follow the WeChat public account: Electronic Engineering DIY Studio
No.: 0001Hardware composition:This design consists of STC series single chip microcomputer + 12864 display + pow
This book "Advanced C/C++ Compilation Technology" compiled by Milan Stevanovich comprehensively and systematically explains the inside story and technical details of compilation, linking, loading and
As the title says, the manual of CC2642R says – 2× UART,
1. Can it be understood that there are 2 hardware serial ports, and then the Sensor Controller can be used to simulate one serial port, so that