Source code developed based on MFRC500 card reader-Embedded Development-EEWORLD

Recommended ContentMore

Open source project More

Searched by Users

Just Take a LookMore

The CC2540 transmit power is not enough (for example, not enough to 0dbm). How can this be solved? The impedance is already 50 ohms.
[i=s]This post was last edited by QWE4562009 on 2021-7-23 13:46[/i]CC2540 transmission power is not enough (for example, not enough to 0dbm), how can it be solved? The impedance is already 50 ohms.
"Smart Sensor Design", a reference book for sensor development and design
The author of this book is Creed Huddleston, a senior sensor design expert. "Smart Sensor Design" introduces the design technology of smart sensor application systems, strives to combine theory with p
I would like to ask a question about circuit design.
[i=s]This post was last edited by hau30729 on 2019-6-26 10:21[/i]I want to read an I/O signal from the outside. The signal can be High or Low. I originally wanted to use PC817 for isolation. The probl
Cadence creates a new component
For a component like this, how are the internal inductors and connecting wires added?
TMS320F28335 SVPWM source program
[size=4]The microcontroller source program is as follows:[/size] [size=4]//****************************************************/[/size] [size=4]//File name: SVPWM.c[/size] [size=4]//Function: Call the
A professor said that due to the needs of safety and stability, 8-bit microcontrollers are used on satellites. Is this true?
Battle of MicroPython Forks
Commodore 64 emulator for STM32F429 Discovery
I would like to know the name of this plug, thank you!
[Project source code] FPGA-based snake transplantation

Trending Downloads

Source code developed based on MFRC500 card reader

Document Introduction