I use the following program to output a 125K square wave, but the output is a 50K square wave. I don't know why. The oscilloscope I use is a 20M dual-core oscilloscope from CALTEK, model number is CA8
[p=35, null, left][backcolor=rgb(222, 240, 251)][color=rgb(74, 74, 74)][font=微软雅黑][size=14px]The correct way to draw a long groove in Protel 99 SE is to use the following figure to stack holes of Pad
First follow the official tutorial to install the NPU runtime configuration
https://v853.docs.aw-ol.com/npu/npu_runtime/
Configure YOLOV3
https://v853.docs.aw-ol.com/npu/npu_demo/
This demo can frame
[size=4]To learn DSP, of course, you should start with some simple test programs. It is often used to make an LED flash, but there is a misunderstanding in it. The analysis is as follows, taking the t
1 Introduction With the development of embedded microcomputer control technology and fieldbus technology, the process control of modern trains has developed from a centralized direct digital control s