Now switch to 3D view to see the following effect, it seems that there is no green oil and you can see the copper skin directly. Clicking "Clear" in the lower right corner does not work.
Prepare rt_thread studio to configure SPI1 to drive ILI9341 screen. After learning other board driver spi settings, I used rt_thread studio to configure spi, but failed to mount spi in the device.
The
1 OverviewThis is a μCOS-III operating system compatibility layer for the RT-Thread operating system, which allows projects based on the μCOS-III operating system of Micriμm, an American company, to q
I use the lsm6dsl sensor at 3.3 working voltage, the power consumption will increase by 2mA
Is there something not configured correctly?/*** @briefInitialize the LSM6DSL sensor* @parampObj the device
[i=s]This post was last edited by lugl4313820 on 2022-4-4 00:25[/i]My smart cold storage management system first needs to be built: server, wifi, sensor. The current project design is to use RVB to co