代码
#include "driverlib.h"
void main (void)
{//Stop watchdog timerWDT_A_hold(WDT_A_BASE);//Set P1.0 to output directionGPIO_setAsOutputPin(GPIO_PORT_P1,GPIO_PIN0);//Enable P1.4 internal resistance as p
Hey guys, I recently made a boost circuit using tps61040 to boost 5v to around 9v to power an oled display. But now the voltage has risen to 11v, and I measured FB, the fb pin is 1.39v (the manual say
[Atria AT32WB415 series Bluetooth BLE 5.0 MCU] + CAN communicationCAN communication hardwareAccording to the AT32WB415 data sheet, this chip has a CAN communication interface (2.0B active) and built-i