A complete DSP program contains at least three parts: program code, interrupt vector table, link command file (or link configuration file) (*.cmd). The link configuration file determines the options w
[i=s]This post was last edited by gyp1 on 2019-9-30 16:40[/i]Magnetic field mode test and test summaryThis test is based on the magnetic field mode, and the test target is the drive power circuit part
[align=center]Chapter 5[/align][align=left]Main content:[/align][align=left]1. When programming the system on bare metal, first initialize the relevant hardware, and then let the main program loop con