The DCM ChiP is an isolated, regulated DC-DC converter that operates from an unregulated wide range input to produce an isolated output. With its high-frequency zero voltage switching (ZVS) topology,
(1) The first step is to add a custom NV_ITEM_ID:In the ZComDef.h file referenced by Zmain.c, there is the following code;// NV Items Reserved for applications (user applications)// 0x0201 ?0x0FFFThis
The last sensor LSM6DUO
6-axis accelerometer and gyroscope sensor.Schematic diagram, IIC address is 0xD6 :register:
This sensor has many registers, but few of them are used.Here are some commonly used
Developing a low drift system can be difficult, especially when using bipolar input signals. Applications such as the bidirectional current sensing shown in Figure 1 require the use of two well matche