External interrupt initialization
#include “extint.h”
//Both buttons and external interrupts use GPIO13, query and interrupt cannot be used at the same timevoid InitExtInt(void){
EALLOW;GpioCtrlRegs.G
Author: Mingmo Zhu If you are using a fuel gauge for the first time and don't know where to start, if you see so many register parameters and don't know which one to configure, if you are a little con
The following is an experiment on the use of voltage sensors and current sensors. Thanks for your advice! !
1. Voltage sensor measures the voltage of DCDCExperimental steps:First check the model of th