I just learned Allegro and I don't quite understand how to set up via opening and capping. When making vias, I added SOLDERMASK (as shown in Figure 1). I have the following questions to ask you: Quest
[size=4]Interrupts largely reflect the performance of a single-chip microcomputer. From this point of view, MSP430 has done a good job in interrupts, mainly providing a very rich interrupt source, inc
[i=s]This post was last edited by littleshrimp on 2020-2-26 12:57[/i]There have been news reports that remote “voice” hacking can be achieved by shining a laser on the MEMS microphone of a smart speak
There are four types of CC2540 transmission power, namely 4dBm, 0dBm, -6dBm, -23dBm. The corresponding conversion power is 2.51mw, 1mw, 0.251mw, 0.005mw. The corresponding transmission distances are 3