MCP6291/MCP6292/MCP6293/MCP629

DescripTIon

The Microchip Technology Inc. MCP6291/1R/2/3/4/5

family of operaTIonal amplifiers (op amps) provide wide

bandwidth for the current. This family has a 10 MHz

Gain Bandwidth Product (GBWP) and a 65° phase

margin. This family also operates from a single supply

voltage as low as 2.4V, while drawing 1 mA (typical)

quiescent current. In addiTIon, the MCP6291/1R/2/3/4/5

supports rail-to-rail input and output swing, with a

common mode input voltage range of VDD + 300 mV to

VSS – 300 mV. This family of operaTIonal amplifiers is

designed with Microchip’s advanced CMOS process.

The MCP6295 has a Chip Select (CS) input for dual op

amps in an 8-pin package. This device is manufactured

by cascading the two op amps, with the output of

op amp A being connected to the non-inverting input of

op amp B. The CS input puts the device in a Low-power

mode.

The MCP6291/1R/2/3/4/5 family operates over the

Extended Temperature Range of -40°C to +125°C. It

also has a power supply range of 2.4V to 6.0V.

unfold

Recommended ContentMore

Open source project More

Popular Components

Searched by Users

Just Take a LookMore

Single TL431 constant current improved circuit
[size=4]如图，即是利用单个TL431恒流的改进型示意图。[/size] [size=4] [/size] [align=center][size=4][/size][/align][size=4] [/size] [size=4]原理：此电路同样是利用了TL431的2.495V的基准来做恒流，跟上面的电路不同点在于减少了电流取样电路的电压，只要合计设计R12，R13，R14的值，可以限制L
Looking for: 3.7V lithium battery charging, boost, power, switch, SOP8 chip
1. 3.7V boost to 5V (or 6V, or 9V), 2A--4A. 2. With 1-4 lights to choose from for power display, the LED will always display after power on. 3. 4.2-4.4V charging protection, overcurrent and overload p
Merry Christmas Eve
[size=4]Today is Christmas Eve, I wish you and your family health and happiness! Eat apples~~ [/size]
MicroPython upgraded to v1.11
MicroPython has just been upgraded to v1.11
【ufun learning】uFUN+TB6612FNG control motor forward and reverse
[i=s]This post was last edited by Min丨Dayu on 2019-8-26 21:35[/i]This content is originally created by EEWORLD forum user Min Da. If you want to reprint or use it for commercial purposes, you must obt
More images of the sensor suite
Modelsim 10.5b
How to set up the serial port of msp430fr5739
Arduino remote control kit solves all your problems
Configuration and use of TMS320F28379D SCID SCIB

Trending Downloads