A SimpleBLEPeripheral project. UART is used, Bluetooth communication does not use serial port, CC2541 can realize Bluetooth communication without serial port.attWriteReq_t req;
req.pValue = GATT_bm_al
There are several problems when ADC samples two sets of DAC output voltages, as shown in the figure. In addition, if the signal is about 1uA, do we need a 20-bit ADC chip? Do we need to consider the f
.main .content are separated by a space, indicating a descendant selector, which selects the element containing pp within the .main element.For example:
div class="main"div class="content"Selected ele
I recently used STM32F767 in a project. The internal AD is 12 bits, which does not meet the requirements. I looked for ADS1274, which has 64 pins, but it has too many pins. I also looked for other AD