My ucGUI file

Recommended ContentMore

Open source project More

• 10.5GHz (X-band) patch antenna
• Dabai o((>ω< ))o
• Audio power amplifier schematic and PCB (based on TDI1521)
• switching power supply
• SW3518S full protocol fast charging power module
• NCP-NCV51563D2PAK7LGEVB: Isolated dual-channel gate driver NCP/NCV51563 EVB OPN
• stereo light cube
• GL823K TF (Micro SD) card reader
• Linear DC regulated power supply
• Ctrl_Mini

Searched by Users

• DWIN Serial Port Screen DGUSII Development Guide
• This is the IBM Thinkpad fan control software tpfancontrol v020
• Interfacing Xilinx FPGAs with TI DSP Platforms Using EMIF
• XILINX FPGA Digital Signal Processing Definitive Guide: From HDL to Model and C Description
• stc12c2052 rs485 applet stc12c2052 rs485 applet
• U disk Dos installation and boot files (DOS+Grud for self-made bootable U disk)
• IEC101 IEC104 test software V1.0 Free installation
• Intelligent building weak current building weak current engineering design manual.rar
• Download the cracked version of pkpm2005
• Ghost 11 DOS version download

Just Take a LookMore

• Several indoor wireless positioning technologies
  [size=4][color=#000000][backcolor=white]Indoor GPS Positioning Technology[/backcolor][/color][/size] [size=4][color=#000000][backcolor=white] [/backcolor][/color][/size] [size=4][color=#000000][backco
• NXP Rapid IoT Review] +4. Learn the design ideas of POWER circuits
  [i=s]This post was last edited by chrisrh on 2018-12-31 17:16[/i] [size=4]In the third chapter of the user manual, the hardware architecture of Rapid IoT is introduced. The main MCU and the peripheral
• HTS221 self-heating function test
  [i=s]This post was last edited by littleshrimp on 2019-9-29 22:12[/i]HTS221 has a self-heating function inside to detect whether the sensor is working properly The location is in bit 1 of the CTRL_REG
• Understanding the configuration of C2000 series CMD files
  [i=s]This post was last edited by fish001 on 2019-5-18 18:13[/i] [size=4] Many friends ask questions about CMD. There are indeed many problems in engineering caused by poor CMD configuration. I have r
• [Xiaomeige SoC] Generate preloader under win10 and report Failed to open gdrive/…/uboot-socfpga.tar.gz
  [i=s]This post was last edited by Xiao Mei Ge on 2019-1-29 11:27[/i] When netizens who develop SoC follow Xiao Mei Ge's SoC development tutorial to develop SoC under Win10, they often encounter the pr
• Looking for a voltage detection circuit or chip, 3v to 12v
• You must call ros::init() before creating the first NodeHandle
• Some comments for the forum
• How can dust people reply to receive confirmation information? . .
• GD32E103 eval can be compiled with IAR

Trending Downloads

• Monte Carlo method courseware
• 51 MCU instruction table
• Personal 3D component library: Switch-Piano-DIP-5.SLDPRT
• 04_Chapter 4, Hardware Abstraction Layer.ppt
• Solving an Android Threading Problem
• Xilinx7 series FPGA entry-level image processing V1
• First Prize in the Southwest Division of the National Graduate Electronic Design Competition and Award-winning Works in the Japan FPGA Competition
• Technical specification for design, installation and project acceptance of solar water heating systems
• Oilfield Mobile GIS Service Based on Mobile SVG
• Serial port DMA sending

Trending ArticlesMore

• I can miss anything but you, my Maxim serial transceiver~
• Practical | Analysis and application of four common constant current source circuits
• Renesas Electronics Wins "2019 CITE Innovation Award"
• A few pictures to understand how to choose ARM9 core board
• Revolutionizing radar design with electronically reconfigurable GaN power amplifiers
• Power Management IC "BD71850MWV"
• Nature lists these codes, all of which have changed science: Fortran, AlexNet, arXiv, etc.
• In-depth understanding of Linux kernel process sleep (Part 2)
• NVIDIA Lecture Room | What is Graphics Analytics?
• Why is Tesla not short of chips?