doc

Crack Analysis and Welding of Manhole Forgings of Thick-walled Pressure Oil Tanks

  • 2013-09-22
  • 181KB
  • Points it Requires : 2

During the welding repair of the combined weld between the manhole pipe forging and the cylinder of the thick-walled pressure oil tank, welding cracks were abnormally generated and continued to extend to the manhole pipe forging. The phenomenon was analyzed, observed under an electron microscope, and chemical composition analysis and mechanical property tests were performed. It was found that the manhole pipe forging had poor toughness and coarse grains. The normalizing and tempering heat treatment process was used to re-heat treat the manhole pipe forging, which can make the forging performance meet the standard requirements again. The combined weld between the manhole pipe forging and the cylinder was welded according to the welding process requirements and passed the flaw detection in one time.

unfold

You Might Like

Uploader
froglucky
 

Recommended ContentMore

Popular Components

Just Take a LookMore

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号
×