The control cycle is 20ms, and the timer is used to enter the interrupt every 0.5ms to adjust the angle of the servo. However, I also used a temperature sensor and LCD1602 to display the temperature,
The following figure shows a buck-boost circuit generated using TI WEBENCH. The main control IC is LM5118.The parameters are as follows: Input voltage range: DC22.0V-DC45V;Output voltage: DC24.0V;Cont
I received the package from Digikey a few days ago, but I was busy and didn't have time to unpack it. I left it for a few days to disinfect it naturally. The board should be from the United States, so
The development kit that comes with the HT32F1654 is very convenient to use
By moving the ADC corresponding code into the LCD routine, the ADC data can be displayed on the LCD.
The function that contr
During the Mid-Autumn Festival, engineers will not work overtime!
(Okay, it’s late, so I want to say belated blessings. Happy Mid-Autumn Festival to all my fellow engineers )