SVPWM is generally generated using 7-segment or 5-segment methods, and the location of the synthetic magnetic field needs to be considered. Recently, I was studying TI's C2000-launchpadTMS320f28027F p
module DSP_RST(input clk_25m, input RESETSTAT, //DSP reset status 0 means reset status 1 means working statusinput LOCKED, //Is the clock module normal?
output ref LRESETNMIENz = 1'b0,//局部复位管脚
output
On October 25, 2020, Samsung Electronics announced that its chairman Lee Kun-hee had passed away due to illness. Since he was hospitalized for a sudden heart attack in 2014, the 70-year-old man has be
1. Hardware
1. OLED pin introduction
OLED pin, is 7-pin SPI mode.
1). GND power ground
2). VCC power supply positive (3~5.5V)
3). D0 OLED's D0 pin is the clock pin in SPI and IIC communication
4). D1
[i=s]This post was last edited by zjd01 on 2019-8-19 18:46[/i]This evaluation uses the PWM modulation function of TGF4042 to modulate the signal and then pass it through a simple analog filter. Use an