Note the following points about the program:1. To configure a port 0 pin as an ADC input, the corresponding bit in the APCFG register must be set to 1. The default value of this register selects the p
What is the trigger hold time of an oscilloscope?
There must be a time interval between the oscilloscope being triggered and the reconnection of the trigger circuit. The trigger suppression time is th
The microcontroller source program is as follows:#include "5110.h"
unsigned char Font_code[][6] =
{{0x00,0x00,0x00,0x00,0x00,0x00},// (0){0x00,0x00,0x00,0x4F,0x00,0x00},//!(1){0x00,0x00,0x07,0x00,0x07
[i=s]This post was last edited by BinWin on 2019-7-21 19:42[/i]First of all, they should post nude photos of these two guysX-NUCLEO-IKS01A3 is a multi-sensor board that integrates temperature and humi