3M
™
Mini D Ribbon (MDR) Connectors
.050″ IDC Wiremount Plug - Shielded
101 Series
• Wiper-on-wiper contact for reliable repetitive
plugging
• MDR digital LCD interface as a 20 or 26
contact connector
• IEEE 1284C Interface as a 36 contact
connector
• Accepts a wide variety of cable constructions
including flat, round, twisted pair and twinax
cables
• Accepts a wide variety of shielded junction
shells
• Contacts: 14, 20, 26, 36, 40, 50, 68, 80 and 100
• See Regulatory Information Appendix (RIA)
for chemical compliance information
Date Modified: February 7, 2007
TS-0423-14
Sheet 1 of 3
Physical
Insulation Material: Glass Reinforced Polyester
Flammability: UL 94V-0
Body Color: Black
Cover Color:
Black, Gray
Contact
Material: Beryllium Copper
Underplating: 80
μ″
[ 2.0
μm
] Nickel
Wiping Area Plating: 30
μ″
[ 0.76
μm
] Min. Gold
IDC Contacts Plating:
Gold flash
Shroud
Material:
Plating:
Wire Accommodation
Black Cover:
Gray Cover:
Steel
Nickel
28 AWG Stranded, 30 AWG Solid (Insulation Diameter = 0.7 mm Max.)
26 AWG Solid (Insulation Diameter = 0.7 mm to 0.9 mm)
Marking:
3M Logo and Part Number
Electrical
Current Rating:
1 A
Insulation Resistance:
> 1
×
10
8
Ω
at 500 V
DC
Withstanding Voltage:
500 V
RMS
for 1 Minute
Environmental
Temperature Rating:
-20°C to +85°C
UL File No.: E68080
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Mini D Ribbon (MDR) Connectors
.050″ IDC Wiremount Plug - Shielded
Contact
Quantity
14
26
50
Dimensions
A
.300 [ 7.62 ]
.600 [ 15.24 ]
1.200 [ 30.48 ]
B
.54 [ 13.8 ]
.84 [ 21.4 ]
1.44 [ 36.6 ]
C
.72 [ 18.2 ]
1.02 [ 25.8 ]
1.62 [ 41.1 ]
D
.58 [ 14.7 ]
.88 [ 22.4 ]
1.48 [ 37.6 ]
101 Series
Body (14, 26 and 50 positions)
Cover Assembly
.21
[ 5.2 ]
Last Position
.126
[ 3.20 ]
.13
[ 3.2 ]
.025
[ 0.64 ]
0 Position
(See Note 1)
.050
[ 1.27 ]
Position 1
(See Note 2)
Position 3
Position 2
.189
[ 4.80 ]
Cover 1
D
.06
[ 1.5 ]
101XX
.18
[ 4.5 ]
.26
[ 6.6 ]
.50
[ 12.7 ]
.29
[ 7.4 ]
C
Body
.13 [ 3.20 ]
Cover 2
Position 1
Position 2
Position 3
.050
[ 1.27 ]
.30
[ 7.5 ]
.36
[ 9.1 ]
.26
[ 6.5 ]
.29
[ 7.3 ]
.08 [ 2.0 ]
Last Position
Position
(See Notes)
A
B
Notes:
1.Circle (0) position indicates #1 position in cable, when utilizing 0.025
″
pitch flat cable.
2.Triangle (∇) position indicates #2 position in cable, when utilizing 0.025
″
pitch flat cable.
15°
D
In c h
[m m ]
T o le ra n c e U n le s s N o te d
.0
in c h
± .1
.0 0
.0 0 0
± .0 1 ± .0 0 5
[ ] D im e n s io n s fo r R e fe re n c e
O n ly
Ordering Information
(See page 3 for other sizes and assembly tools.)
Contact Quantity
(See Table)
Note: 100 pos = A0
101XX-60X0EC
Wiping Interface Plating:
C =
30μ
m [ 0.76 mm ] Min. Gold over Ni
IDC Plating:
E = Gold Flash over Ni
(App E1 & C1 apply)
Wire Accommodation:
0 = Black Cover: 28 AWG Stranded, 30 AWG Solid
1 = Gray Cover: 26 AWG Solid (Available in 68 Contact Only, UL Pending)
TS-0423-14
Sheet 2 of 3
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Mini D Ribbon (MDR) Connectors
.050″ IDC Wiremount Plug - Shielded
Contact
Quantity
20
36
40
68
80
100
Dimensions
A
.450 [ 11.43 ]
.850 [ 21.59 ]
.950 [ 24.13 ]
1.650 [ 41.91 ]
1.950 [ 49.53 ]
2.450 [ 62.23 ]
B
.69 [ 17.6 ]
1.09 [ 27.8 ]
1.19 [ 30.3 ]
1.89 [ 48.1 ]
2.16 [ 54.8 ]
2.66 [ 67.5 ]
C
.87 [ 22.0 ]
1.27 [ 32.2 ]
1.37 [ 34.7 ]
2.07 [ 52.5 ]
2.37 [ 60.1 ]
2.87 [ 72.8 ]
D
.73 [ 18.6 ]
1.13 [ 28.7 ]
1.23 [ 31.3 ]
1.93 [ 49.0 ]
2.23 [ 56.7 ]
2.73 [ 69.4 ]
101 Series
Cover Assembly
.21
[ 5.33 ]
Body (20, 36, 40, 68, 80 and 100 positions)
.025
[ 0.64 ]
.050
[ 1.27 ]
Last
Position
.189
[ 4.80 ]
.126
[ 3.20 ]
.13
[ 3.30 ]
0 Position
(See Note 1)
Cover 1
D
.26
[ 6.6 ]
.06
[ 1.5 ]
.29
[ 7.4 ]
Position 1
(See Note 2)
Position 3
Position 2
101XX
.50
[ 12.7 ]
.13
[ 3.20 ]
Cover 2
C
.18
[ 4.5 ]
Position 2
Position 3
Position 1
Body
.08 [ 2.0 ]
.050
[ 1.27 ]
.30
[ 7.5 ]
.36
[ 9.1 ]
.26
[ 6.5 ]
D
.29
[ 7.3 ]
Position
(See Notes)
A
B
Last
Position
15°
In c h
[m m ]
T o le ra n c e U n le s s N o te d
.0
in c h
± .1
.0 0
.0 0 0
± .0 1 ± .0 0 5
Notes:
1.Circle (0) position indicates #1 position in cable, when utilizing 0.025
″
pitch flat cable.
2.Triangle (∇) position indicates #2 position in cable, when utilizing 0.025
″
pitch flat cable.
[ ] D im e n s io n s fo r R e fe re n c e
O n ly
Ordering Information
Contact Quantity
(See Table)
Note: 100 pos = A0
3: Assembly tools: 3M™ Hand Press Kit 3829 (68
position & below)
.
All Sizes: 3M™ Assembly Press
10962-2000; 3M™ Lacing Fixture 10962-2000, 3M™
Cutting Unit 10961 & 3M™ Wire Clamp 10964-1 (14-50
pos.) or 3M™ Wire Clamp 10964-2 (68-100 pos.).
101XX-60X0EC
Wiping Interface Plating:
C =
30μ
m [ 0.76 mm ] Min. Gold
over Ni
IDC Plating:
E = Gold flash over Ni
(App E1 & C1 apply)
TS-0423-14
Sheet 3 of 3
Wire Accommodation:
0 = Black Cover: 28 AWG Stranded, 30 AWG Solid
1 = Gray Cover: 26 AWG Solid (Available in 68 Contact
Only, UL Pending)
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/
EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon
information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/17/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in
excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision
2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in
writing, this information represents 3M’s best knowledge and belief based upon information provided by third party
suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217-B
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part
does not
contain any of the following substances in excess of the following maximum
concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium,
polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise
stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information provided by
third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability
and Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
20
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits
for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006,
means that the product or part
does
contain a substance, as detailed in the chart below, in excess of the following
maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless
otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform
with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in
accordance with the product Warranty stated below.
Name and Content of Hazardous Substances or Elements
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the
accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended
application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s
current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in
writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER
WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of the 3M product.
Except where prohibited by law, 3M will not be liable for any
indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3
Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/interconnects
RIA-2217-B
© 3M 2007
Talking
京公网安备 11010802033920号
EEWORLD
