AL4CE205/215/225/235/245
256, 512, 1K, 2K, 4K x 18 Advanced Synchronous
FIFOs
Features
Applications
-
-
-
-
-
-
-
-
Multimedia System
ATM Switches
Routers
Cable Modems
Wireless Base Stations
SONET(Synchronous Optical Network)
Multiplexers
TBC(Time Base Corrector)
Hard Disk cache memory
•
•
•
•
•
•
•
•
•
•
•
•
•
•
High performance, low-power, FIFO(First-In
First-Out) memory
256 x 18 bit I/O port (AL4CE205)
512 x 18 bit I/O port (AL4CE215)
1K x18 bit 1/O port (AL4CE225)
2K x18 bit I/O port (AL4CE235)
4K x18 bit I/O port (AL4CE245)
High clock speed (133MHz)
Fully independent read/write access
Retransmit the data (reread the data)
Empty, Full, Half Full and programmable
Almost Empty, Almost Full flags
Output enable control (data skipping)
User selectable input and output bus width
Big/Little-Endian word format selectable
3.3V±10% power supply with 5V signal tolerant
input
Standard 64-pin TQFP and STQFP
Description
The AL4CE2x5 series memory products are
high-performance, low-power 18bit read/write
FIFO (First-In-First-Out) memory chip designed
to buffer high speed streaming data for a wide
range of applications. The AL4CE2x5 FIFO
memories are the advanced version of
AL4CS2x5.
This product series support
additional functions, such as Bus-matching,
Endian select and Retransmit, can benefit
designing efforts.
•
Ordering Information
Part number
Package
Power Supply
AL4CE205, AL4CE215,
AL4CE225, AL4CE235, AL4CE245
64-pin plastic TQFP and STQFP
+3.3V±10%
48
49
33
32
AVERLOGIC
AL4CE2X5
X-XX-XX
XXXXX
XXXX
64
17
1
16
TQFP, STQFP PACKAGE TOP VIEW
/OE
Input data bus
Input
Buffer
(256,512,
1k ,2k, 4k)
x18 Memory
Array
Output
Buffer
Output data bus
WCLK
/WEN
Write Control
Logic
Write Pointer
/LD
Read Control
Logic
Read Pointer
RCLK
/REN
/FF
Offset
Regissers
Flag Logic
/EF
/HF
/PAF
/PAE
/BEB
/RT
/IW
/OW
/RS
Reset Logic
Control Logic
Figure 1. AL4CE2x5 FIFO Block Diagram
The 18bit input and output ports operate
independently at a maximum speed of 133 MHz.
The built-in address decoder and pointer managing
circuits provide a straightforward bus interface to
serially read/write memory that reduces inter-chip
design efforts. The AL4CE2x5 embedded memory
array and high performance process technologies
with extended controller functions (read skip, fixed
and programmable status flags.. etc.) offer flexible
memory management.
These FIFOs support up to 18bit input and output
data bus-width that is controlled by separate clock
and enable signals respectively. The input data is
acquired at each rising edge of a free running write
clock while a write enable control pin is asserted.
The output data is available after each rising edge
of a free running read clock while a read enable
and output enable control pins are asserted. When
output enable (/OE) is LOW, the data output bus
is active. If /OE is HIGH, the output data bus will
be in a high-impedance. This signal can control
whether the data is going to be skipped during the
read operation.
The
FIFO
Full/Empty,
Half-Full
and
programmable Almost Full/Almost Empty flags
are powerful functions that can help controlling
software to manipulate the FIFO more easily or to
do retransmit operation.
Bus-Matching feature can flexibly configure input
and output bus width. The chip can automatically
convert the input data bus width to match up
output data bus width by packing or unpacking the
data. A Big-Endian/Little-Endian data word
format is provided to invert the read-in bytes
sequence for output. And the Retransmit function
allows data to be reread from the FIFO more than
once.
These chips are available as a 64pin TQFP and
STQFP Package
D
ISTRIBUTED BY
:
A
VER
L
OGIC
T
ECHNOLOGIES
, I
NC
.
TEL
: 1 408 361-0400
e-mail: sales@averlogic.com
URL: www.averlogic.com
July 10, 2001
京公网安备 11010802033920号
EEWORLD
