Magellan™ Motion Processor
for Pulse and Direction Motion Control
MC55000
Electrical Specification
Preliminary
Performance Motion Devices, Inc.
55 Old Bedford Rd
Lincoln, MA 01773
Revision 0.6, November 2003
NOTICE
This document contains proprietary and confidential information of Performance Motion Devices,
Inc., and is protected by federal copyright law. The contents of this document may not be disclosed
to third parties, translated, copied, or duplicated in any form, in whole or in part, without the express
written permission of PMD.
The information contained in this document is subject to change without notice. No part of this
document may be reproduced or transmitted in any form, by any means, electronic or mechanical,
for any purpose, without the express written permission of PMD.
Copyright 2003 by Performance Motion Devices, Inc.
Magellan
and
C-Motion
are trademarks of Performance Motion Devices, Inc
Warranty
PMD warrants performance of its products to the specifications applicable at the time of sale in
accordance with PMD's standard warranty. Testing and other quality control techniques are utilized
to the extent PMD deems necessary to support this warranty. Specific testing of all parameters of
each device is not necessarily performed, except those mandated by government requirements.
Performance Motion Devices, Inc. (PMD) reserves the right to make changes to its products or to
discontinue any product or service without notice, and advises customers to obtain the latest version
of relevant information to verify, before placing orders, that information being relied on is current
and complete. All products are sold subject to the terms and conditions of sale supplied at the time
of order acknowledgement, including those pertaining to warranty, patent infringement, and
limitation of liability.
Safety Notice
Certain applications using semiconductor products may involve potential risks of death, personal
injury, or severe property or environmental damage. Products are not designed, authorized, or
warranted to be suitable for use in life support devices or systems or other critical applications.
Inclusion of PMD products in such applications is understood to be fully at the customer's risk.
In order to minimize risks associated with the customer's applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent procedural hazards.
Disclaimer
PMD assumes no liability for applications assistance or customer product design. PMD does not
warrant or represent that any license, either express or implied, is granted under any patent right,
copyright, mask work right, or other intellectual property right of PMD covering or relating to any
combination, machine, or process in which such products or services might be or are used. PMD's
publication of information regarding any third party's products or services does not constitute PMD's
approval, warranty or endorsement thereof.
MC55000 Electrical Specification – Preliminary 11/14/2003
iii
MC55000 Electrical Specification – Preliminary 11/14/2003
iv
Related Documents
MC50000 Motion Processor User’s Guide (MC50000UG)
How to set up and use all members of the MC50000 Motion Processor family.
MC50000 Motion Processor Programmer’s Command Reference (MC50000PR)
Descriptions of all MC50000 Motion Processor commands, with coding syntax and examples,
listed alphabetically for quick reference.
MC50000 Motion Processor Electrical Specifications
Three booklets containing physical and electrical characteristics, timing diagrams, pinouts, and
pin descriptions of each:
MC55000 Series, for stepping motion control (MC55000ES);
MC58000 Series, for brushed and brushless servo, microstepping and stepping motion
control (MC58000ES).
MC50000 Motion Processor Developer’s Kit Manual (DK50000M)
How to install and configure the DK50000 developer’s kit PC board.
MC55000 Electrical Specification – Preliminary 11/14/2003
v
京公网安备 11010802033920号
EEWORLD
