Freescale Semiconductor
Data Sheet: Advance Information
Document Number: MPC5604BC
Rev. 13, 01/2015
MPC5604B/C
MAPBGA–225
MPC5604B/C
Microcontroller Data Sheet
Features
•
Single issue, 32-bit CPU core complex (e200z0)
— Compliant with the Power Architecture
®
embedded category
— Includes an instruction set enhancement
allowing variable length encoding (VLE) for
code size footprint reduction. With the optional
encoding of mixed 16-bit and 32-bit
instructions, it is possible to achieve significant
code size footprint reduction.
Up to 512 KB on-chip code flash supported with the
flash controller and ECC
64 (4 × 16) KB on-chip data flash memory with ECC
Up to 48 KB on-chip SRAM with ECC
Memory protection unit (MPU) with 8 region
descriptors and 32-byte region granularity
Interrupt controller (INTC) with 148 interrupt
vectors, including 16 external interrupt sources and
18 external interrupt/wakeup sources
Frequency modulated phase-locked loop (FMPLL)
Crossbar switch architecture for concurrent access to
peripherals, flash memory, or RAM from multiple
bus masters
Boot assist module (BAM) supports internal flash
programming via a serial link (CAN or SCI)
Timer supports input/output channels providing a
range of 16-bit input capture, output compare, and
pulse width modulation functions (eMIOS-lite)
10-bit analog-to-digital converter (ADC)
3 serial peripheral interface (DSPI) modules
Up to 4 serial communication interface (LINFlex)
modules
•
•
•
208 MAPBGA
15 mm
15 mm x
(17 x 17 x 1.7 mm)
QFN12
144 LQFP
##_mm_x_##mm
(20 x 20 x 1.4 mm)
100 LQFP
(14 x 14 x 1.4 mm)
SOT-343R
##_mm_x_##mm
TBD
PKG-TBD
## mm x ## mm
64 LQFP
(10 x 10 x 1.4 mm)
•
•
•
•
•
•
•
•
•
•
•
Up to 6 enhanced full CAN (FlexCAN) modules
with configurable buffers
1 inter IC communication interface (I
2
C) module
Up to 123 configurable general purpose pins
supporting input and output operations (package
dependent)
Real Time Counter (RTC) with clock source from
128 kHz or 16 MHz internal RC oscillator
supporting autonomous wakeup with 1 ms
resolution with max timeout of 2 seconds
Up to 6 periodic interrupt timers (PIT) with 32-bit
counter resolution
1 System Module Timer (STM)
Nexus development interface (NDI) per IEEE-ISTO
5001-2003 Class Two Plus standard
Device/board boundary Scan testing supported with
per Joint Test Action Group (JTAG) of IEEE (IEEE
1149.1)
On-chip voltage regulator (VREG) for regulation of
input supply for all internal levels
•
•
•
•
•
•
•
This document contains information on a product under development. Freescale reserves
the right to change or discontinue this product without notice.
© Freescale Semiconductor, Inc., 2009-2015. All rights reserved.
Table of Contents
1
2
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
1.1 Document overview . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
1.2 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Package pinouts and signal descriptions . . . . . . . . . . . . . . . . .7
2.1 Package pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.2 Pad configuration during reset phases . . . . . . . . . . . . . 11
2.3 Voltage supply pins . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
2.4 Pad types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
2.5 System pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
2.6 Functional ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
2.7 Nexus 2+ pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
2.8 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . .30
2.9 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
2.10 Parameter classification . . . . . . . . . . . . . . . . . . . . . . . .30
2.11 NVUSRO register . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
2.11.1 NVUSRO[PAD3V5V] field description . . . . . . . .30
2.11.2 NVUSRO[OSCILLATOR_MARGIN] field
description . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
2.11.3 NVUSRO[WATCHDOG_EN] field description . .31
2.12 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . .32
2.13 Recommended operating conditions . . . . . . . . . . . . . .33
2.14 Thermal characteristics . . . . . . . . . . . . . . . . . . . . . . . . .35
2.14.1 Package thermal characteristics . . . . . . . . . . . .35
2.14.2 Power considerations . . . . . . . . . . . . . . . . . . . .36
2.15 I/O pad electrical characteristics . . . . . . . . . . . . . . . . . .36
2.15.1 I/O pad types . . . . . . . . . . . . . . . . . . . . . . . . . . .36
2.15.2 I/O input DC characteristics . . . . . . . . . . . . . . . .37
2.15.3 I/O output DC characteristics. . . . . . . . . . . . . . .38
2.15.4 Output pin transition times . . . . . . . . . . . . . . . . .40
2.15.5 I/O pad current specification . . . . . . . . . . . . . . .41
2.16 RESET electrical characteristics. . . . . . . . . . . . . . . . . .46
2.17 Power management electrical characteristics. . . . . . . .48
2.17.1 Voltage regulator electrical characteristics . . . .48
2.17.2 Low voltage detector electrical characteristics .52
2.18 Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . .54
2.19 Flash memory electrical characteristics . . . . . . . . . . . .56
2.19.1 Program/Erase characteristics . . . . . . . . . . . . . 56
2.19.2 Flash power supply DC characteristics . . . . . . 57
2.19.3 Start-up/Switch-off timings . . . . . . . . . . . . . . . . 58
2.20 Electromagnetic compatibility (EMC) characteristics. . 58
2.20.1 Designing hardened software to avoid noise
problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
2.20.2 Electromagnetic interference (EMI) . . . . . . . . . 58
2.20.3 Absolute maximum ratings (electrical sensitivity)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
2.21 Fast external crystal oscillator (4 to 16 MHz)
electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . 60
2.22 Slow external crystal oscillator (32 kHz)
electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . 62
2.23 FMPLL electrical characteristics . . . . . . . . . . . . . . . . . 64
2.24 Fast internal RC oscillator (16 MHz)
electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . 65
2.25 Slow internal RC oscillator (128 kHz)
electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . 66
2.26 ADC electrical characteristics . . . . . . . . . . . . . . . . . . . 68
2.26.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
2.26.2 Input impedance and ADC accuracy . . . . . . . . 68
2.26.3 ADC electrical characteristics . . . . . . . . . . . . . 73
2.27 On-chip peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
2.27.1 Current consumption . . . . . . . . . . . . . . . . . . . . 75
2.27.2 DSPI characteristics . . . . . . . . . . . . . . . . . . . . . 76
2.27.3 Nexus characteristics . . . . . . . . . . . . . . . . . . . . 82
2.27.4 JTAG characteristics . . . . . . . . . . . . . . . . . . . . 83
Package characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
3.1 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . 84
3.1.1 64 LQFP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
3.1.2 100 LQFP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
3.1.3 144 LQFP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
3.1.4 208 MAPBGA. . . . . . . . . . . . . . . . . . . . . . . . . . 93
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
3
4
5
MPC5604B/C Microcontroller Data Sheet, Rev. 13
2
Freescale Semiconductor
1
1.1
Introduction
Document overview
Freescale Semiconductor
MPC5604B/C Microcontroller Data Sheet, Rev. 13
3
This document describes the features of the family and options available within the family members, and highlights important electrical and physical
characteristics of the device. To ensure a complete understanding of the device functionality, refer also to the device reference manual and errata sheet.
1.2
Description
The MPC5604B/C is a family of next generation microcontrollers built on the Power Architecture
®
embedded category.
The MPC5604B/C family of 32-bit microcontrollers is the latest achievement in integrated automotive application controllers. It belongs to an expanding family
of automotive-focused products designed to address the next wave of body electronics applications within the vehicle. The advanced and cost-efficient host
processor core of this automotive controller family complies with the Power Architecture embedded category and only implements the VLE (variable-length
encoding) APU, providing improved code density. It operates at speeds of up to 64 MHz and offers high performance processing optimized for low power
consumption. It capitalizes on the available development infrastructure of current Power Architecture devices and is supported with software drivers, operating
systems and configuration code to assist with users implementations.
Table 1. MPC5604B/C device comparison
1
Device
Feature
MPC56 MPC56 MPC56 MPC56 MPC56 MPC56 MPC56 MPC56 MPC56 MPC56 MPC56 MPC56 MPC56 MPC56 MPC56 MPC5604
02BxLH 02BxLL 02BxLQ 02CxLH 02CxLL 03BxLH 03BxLL 03BxLQ 03CxLH 03CxLL 04BxLH 04BxLL 04BxLQ 04CxLH 04CxLL BxMG
e200z0h
Static – up to 64 MHz
256 KB
384 KB
64 KB (4 × 16 KB)
24 KB
32 KB
28 KB
8-entry
12 ch
28 ch
36 ch
8 ch
28 ch
12 ch
28 ch
36 ch
8 ch
Yes
12 ch,
16-bit
28 ch,
16-bit
56 ch,
16-bit
12 ch,
16-bit
28 ch,
16-bit
12 ch,
16-bit
28 ch,
16-bit
56 ch,
16-bit
12 ch,
16-bit
28 ch,
16-bit
12 ch,
16-bit
28 ch,
16-bit
56 ch,
16-bit
12 ch,
16-bit
28 ch,
16-bit
56 ch,
16-bit
28 ch
12 ch
28 ch
36 ch
8 ch
28 ch
36 ch
Introduction
40 KB
32 KB
48 KB
512 KB
CPU
Execution
speed
2
Code Flash
Data Flash
RAM
MPU
ADC (10-bit)
CTU
Total timer
I/O
3
eMIOS
Table 1. MPC5604B/C device comparison
1
(continued)
Device
Feature
MPC56 MPC56 MPC56 MPC56 MPC56 MPC56 MPC56 MPC56 MPC56 MPC56 MPC56 MPC56 MPC56 MPC56 MPC56 MPC5604
02BxLH 02BxLL 02BxLQ 02CxLH 02CxLL 03BxLH 03BxLL 03BxLQ 03CxLH 03CxLL 04BxLH 04BxLL 04BxLQ 04CxLH 04CxLL BxMG
2 ch
10 ch
—
5 ch
20 ch
3 ch
3
5
2
2
6
3
2
5
3
6
2
3
7
1
Yes
45
79
123
45
79
45
79
123
JTAG
64
LQFP
100
LQFP
144
LQFP
64
LQFP
100
LQFP
64
LQFP
100
LQFP
144
LQFP
64
LQFP
100
LQFP
64
LQFP
100
LQFP
144
LQFP
64
LQFP
45
79
45
79
123
45
79
123
Nexus2+
100
208
LQFP MAPBGA
9
3
2
5
10 ch
40 ch
6 ch
2 ch
10 ch
—
5 ch
20 ch
3 ch
2 ch
10 ch
—
5 ch
20 ch
3 ch
10 ch
40 ch
6 ch
2 ch
10 ch
—
5 ch
20 ch
3 ch
4
3
6
2
2
6
3
3
7
2
5
3
6
2 ch
10 ch
—
5 ch
20 ch
3 ch
10 ch
40 ch
6 ch
2 ch
10 ch
—
5 ch
20 ch
3 ch
10 ch
40 ch
6 ch
4
• PWM + MC
+ IC/OC
4
• PWM +
IC/OC
4
• IC/OC
4
SCI (LINFlex)
SPI (DSPI)
CAN
(FlexCAN)
I
2
C
32 kHz
oscillator
GPIO
8
Debug
Package
1
2
3
4
5
6
7
Introduction
MPC5604B/C Microcontroller Data Sheet, Rev. 13
Freescale Semiconductor
8
9
Feature set dependent on selected peripheral multiplexing—table shows example implementation.
Based on 125 °C ambient operating temperature.
See the eMIOS section of the device reference manual for information on the channel configuration and functions.
IC – Input Capture; OC – Output Compare; PWM – Pulse Width Modulation; MC – Modulus counter.
SCI0, SCI1 and SCI2 are available. SCI3 is not available.
CAN0, CAN1 are available. CAN2, CAN3, CAN4 and CAN5 are not available.
CAN0, CAN3 and either CAN1 or CAN4 are available. CAN2, CAN5 and CAN6 are not available
I/O count based on multiplexing with peripherals.
208 MAPBGA available only as development package for Nexus2+.
Block diagram
Figure 1
shows a top-level block diagram of the MPC5604B/C device series.
Introduction
JTAG
JTAG port
Nexus port
Nexus
NMI
SIUL
Voltage
regulator
NMI
Interrupt requests
from peripheral
blocks
INTC
Clocks
FMPLL
CMU
Instructions
e200z0h
(Master)
Data
Nexus 2+
(Master)
64-bit 2 x 3 Crossbar Switch
SRAM
48 KB
Code Flash Data Flash
512 KB
64 KB
SRAM
controller
MPU
Flash
controller
(Slave)
(Slave)
(Slave)
MPU
registers
RTC
STM
SWT
ECSM
PIT
MC_RGM MC_CGM MC_ME MC_PCU
BAM
SSCM
Peripheral bridge
Interrupt
request
SIUL
Reset control
External
interrupt
request
IMUX
GPIO and
pad control
36 Ch.
ADC
CTU
2x
eMIOS
4x
LINFlex
3x
DSPI
I
2
C
6x
FlexCAN
WKPU
I/O
Legend:
ADC
BAM
FlexCAN
CMU
CTU
DSPI
eMIOS
FMPLL
I
2
C
IMUX
INTC
JTAG
LINFlex
ECSM
MC_CGM
...
...
...
...
...
Interrupt
request with
wakeup
functionality
Analog-to-Digital Converter
Boot Assist Module
Controller Area Network
Clock Monitor Unit
Cross Triggering Unit
Deserial Serial Peripheral Interface
Enhanced Modular Input Output System
Frequency-Modulated Phase-Locked Loop
Inter-integrated Circuit Bus
Internal Multiplexer
Interrupt Controller
JTAG controller
Serial Communication Interface (LIN support)
Error Correction Status Module
Clock Generation Module
MC_ME
MC_PCU
MC_RGM
MPU
Nexus
NMI
PIT
RTC
SIUL
SRAM
SSCM
STM
SWT
WKPU
Mode Entry Module
Power Control Unit
Reset Generation Module
Memory Protection Unit
Nexus Development Interface (NDI) Level
Non-Maskable Interrupt
Periodic Interrupt Timer
Real-Time Clock
System Integration Unit Lite
Static Random-Access Memory
System Status Configuration Module
System Timer Module
Software Watchdog Timer
Wakeup Unit
Figure 1. MPC5604B/C block diagram
Table 2
summarizes the functions of all blocks present in the MPC5604B/C series of microcontrollers. Please note that the
presence and number of blocks vary by device and package.
MPC5604B/C Microcontroller Data Sheet, Rev. 13
Freescale Semiconductor
5
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
