85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
Current sense amplifiers are amplifiers that detect current by measuring the voltage drop across a resistor in the current path. Current sense amplifiers output a voltage or current that is proportion...
Based on Xunwei-IMX6ULL development board
Whether we are developing SDK programs or Linux systems, we need to build a development environment first. If we have learned MCU development ( 51 , STM32 , e...
The most important thing when setting the serial port is the baud rate. I recommend a website that can easily calculate the baud rate.
1 P3SEL |= (BIT4 + BIT5); // P3.4,5 = USCI_A0 TXD/RXD2 UCA0CTL1 |...
[size=14px]A minimum system should include the following parts to be able to be used normally: [/size] [size=14px][b]Power supply, reset circuit, clock, BOOT circuit, debug interface, firmware downloa...
#include "io430.h" /* There are two ways to control the on and off of the LED light. Method 1: Interrupt function. Method 2: Use if(P4IN&BIT2) to judge. When writing code, try to...[Details]
11月14日晚间，博主@熊猫很禿然爆料，Redmi K50系列搭载双平台：天玑2000和骁龙870。 Looking at the Redmi product line, each generation of the K series is equipped with MediaTek's Dimensity flagship processor. The Redmi K30 E...[Details]
Even the most advanced "nickel-rich" battery materials will fatigue after long-term use and can no longer be fully charged. According to foreign media reports, researchers from the University of Camb...[Details]
1 Introduction Road lighting is an important part of urban public facilities. At present, most of the domestic road lighting systems do not adopt network monitoring and management, and can on...[Details]
How much do you know about IGBT? IGBT (Insulated Gate Bipolar Transistor), an insulated gate bipolar transistor, is a composite fully controlled voltage-driven power semiconductor device composed o...[Details]
Most ARM-based chips are complex on-chip systems. Most hardware modules in such complex systems are configurable and need to be set to their required working states by software. Therefore, before the ...[Details]
First of all, it depends on the type of signal you need to test and how accurately you want the test to be performed. The most important factors are the accuracy requirements for rise time and ampli...[Details]
standard:
1. The states use enumeration custom types to facilitate unified management and modification.
2. Generally, there should be: Initialize, Idle, Stop, Blank states.
3. Initialize performs...[Details]
On March 8, Audi announced that it will use high-precision swarm data for the first time to improve the monitoring capabilities of its car-to-X service "Ground Hazard Alert" (LHI). This is another st...[Details]
Determination of STM32 independent watchdog IWDG time limit
Watchdog timing limit = value of IWDG_SetReload() / watchdog clock frequency
Watchdog clock frequency = ...[Details]
Exception vector table for s3c2440: The IRQ interrupt address is 0x18. Therefore, based on the previous exception handling method, we write the startup file: Why do you need to reduce lr by 4? Y...[Details]
On the Surface Duo released today, Microsoft confirmed that the machine will be pre-installed with 20 applications, including Google Duo, Photos, Contacts, Messages, Files, Calculator and Clock. In a...[Details]
In the articles "Observation▏LG Energy Solution, the "Second Place" on the Road" and "Opportunities and Challenges Coexist! How will Samsung SDI, which has a growth rate of 81%, perform in the future...[Details]
In recent years, electric bikes can be seen everywhere on the road. Compared with bicycles, they are more labor-saving, easier and faster; compared with cars, they are more flexible and environmen...[Details]
Talking
京公网安备 11010802033920号
EEWORLD
