-
The three most common analog-to-digital converter types in analog front-ends are successive approximation (a), pipeline (b), and delta-sigma (c).
The following block diagrams describe these dif...[Details]
-
Electrification is significantly expanding the range of vehicle motion functions. Each new function equates to more software. This is reflected in the trend towards more centralized E/E architectur...[Details]
-
This document introduces the upgrade and test routines of the ADC driver of the iTOP-4412 development board. The built-in driver can only support one ADC. This article introduces how to modify the co...[Details]
-
According to the "Zero Distance from the Economic and Technological Development Zone Head District" news, on January 10, Zhonggu Times (Beijing) New Energy Technology Co., Ltd. (referred to as: Zhong...[Details]
-
1. Reference tutorial: Qingxiang 51 microcontroller tutorial 2.Achievement effect: Use the keys of an independent keyboard to control changes in digital tube numbers. 3. Basic principles **Featur...[Details]
-
STMicroelectronics and Arrival Collaborate to Provide Advanced Technologies for Next-Generation Electric Vehicles
•
All Arrival models, including vans, buses and th...[Details]
-
In a hybrid power system, the proportion of the motor's output power in the total system output power is usually used to indicate different degrees of hybrid power.
...[Details]
-
illustrate: Library file version: 3.5.0 1. First look at the stm32 startup mode The boot mode of stm32 is determined by the boot0 and boot1 pins of the 32 chip. It is divided into embedded fla...[Details]
-
In recent years, LED has been widely used for its environmental protection and high light efficiency, but the life of LED has also become a concern. The life of LED lamp depends on the driving powe...[Details]
-
Functions of relay protection tester 1. It can test various single relays and a whole set of relay protection screens such as AC/DC, current, voltage, intermediate, self-holding, and signal. It c...[Details]
-
This keil c51 program is suitable for uPC1621/uPC1622 and compatible infrared remote control chips, occupies external interrupt 0 and timer 1, decodes in interrupt mode, saves system resources, and de...[Details]
-
The BCI test method has too high requirements on driving capability, and the isolation from related equipment during the test is not good. The purpose of the direct injection method specified in 150...[Details]
-
1) Basic structure of LED display
The display screen system consists of three parts: signal source, control system and display screen body.
Signal source All receivable signal...[Details]
-
On August 8, Zhongxin Jianhai Semiconductor Technology (Anhui) Co., Ltd. (hereinafter referred to as Anhui Zhongxin Jianhai) successfully completed the trial production of its ceramic thin-film hybri...[Details]
-
The inverter encoder parameter setting is a key step to ensure the normal operation of the inverter and encoder. This article will introduce the inverter encoder parameter setting method in detail,...[Details]