-
The PLC pulse frequency function reads the pulse frequency input by the high-speed counter and converts it to the rotation speed, or converts the current value of the counter to the accumulated rev...[Details]
-
At the Paris International Motor Show held recently,
Citroën's
design director said that a good designer's work must have three characteristics: clear at a glance, memorable, and understa...[Details]
-
The control part uses PICl6F7X series microcontrollers, which are programmed in assembly language. The running speed is fast and can meet the system requirements. Most of the control used here is dig...[Details]
-
Most wiring harness engineers working in OEMs spend a lot of energy repairing cars, that is, checking whether there are any problems with the wiring harness. Here I would like to share with you some ...[Details]
-
Let's analyze why PIC has BANK and PAGE settings from the instruction structure of PIC microcontroller. First, let's see why PIC divides the RAM area into multiple BANKs. Carefully observe the form...[Details]
-
1 Introduction
As one of the most widely used methods of nondestructive testing, eddy current nondestructive testing has the advantages of simple sensor structure, high sensitivity, large ...[Details]
-
1 Introduction The measurement of nonlinear distortion generally uses the fundamental wave suppression method (single tone method), which can be achieved through the fundamental wave suppression netw...[Details]
-
At the end of October, Suzhou Xilian Optoelectronics Technology Co., Ltd. (hereinafter referred to as "Xilian Optoelectronics") officially completed the equity acquisition of Germany's Sicoya Co., Lt...[Details]
-
It is easy to encounter hardfault when debugging STM32. There are many reasons for encountering hardfault. During the debugging period, the root cause of this problem is mostly hardware problems. D...[Details]
-
The PB3 PB4 PA15 pins of stm32 can be released when using SWD simulation and burning and used as ordinary IO ports. The initialization code is as follows: GPIO_InitTypeDef GPIO_InitStructure; ...[Details]
-
This circuit is a simple recording circuit. It is small in size, power-saving, and does not require tape. Working principle of the circuit: This circuit realizes the circuit function by applying...[Details]
-
Recently, some developers complained that Apple was going to remove their apps from the App Store because they had not been updated for "quite a long time". This Friday, Apple officially responded to...[Details]
-
LED
has been widely valued and developed rapidly, which is inseparable from its own advantages. These advantages can be summarized as:
high
brightness
, low operating voltage, low powe...[Details]
-
Conventional nondestructive testing methods are:
-Ultrasonic Testing (UT);
-Radiographic Testing (abbreviated as RT);
-Magnetic particle Testing (MT);
-Penetrant Testing (PT);
- Eddy current ...[Details]
-
CATL, as a leading battery manufacturer in China, recently disclosed its latest achievements in the field of all-solid-state battery research and development. It is reported that the company has se...[Details]