MEAS 5700
Subermsible Liquid Level Pressure Transducer
SPECIFICATIONS
•
•
•
•
CE Compliant and Waterproof
Variety of Pressure Port Configurations
Optional Stainless Steel Snubber
IP68 Rated Connection and Submersible Polyurethane
Jacketed Cable
•
•
Gage, Sealed, Compound
Low Cost
Features
•
•
•
•
•
•
•
•
•
•
Heavy Industrial CE Approval
10 V/m EMI Protection
Reverse Polarity Protection on Input
Short Circuit Protection on Output
±0.25% Accuracy
Up to ±1% Total Error Band
Compact Outline
IP68 Waterproof Grade
Custom Cable Lengths
Polyoxymethylene Protective Cap for Liquid Level
Applications
The M5700 submersible
pressure transducer from the Microfused line of
MEAS, with its modular design, includes an IP68 rated connection and
submersible polyurethane jacketed cable along with a variety of pressure
port options. This series features a low-cost solution for applications
requiring a pressure transducer for use in wet or submerged
environments. This series is suitable for measurement of liquid or gas
pressure, even for difficult media such as contaminated water, steam, and
mildly corrosive fluids.
The transducer’s durability is excellent with no O-rings or organics
exposed to the pressure media. The transducer can be fully submerged
since the wetted materials for the back end consist of FKM
Fluoroelastomers,
316L or 17-4PH stainless steel and polyurethane. A
polyoxymethylene protective cap port option is also available for liquid
level applications. The M5700 is weatherproof and exceeds the latest
heavy industrial CE requirements including surge protection. The circuit
is protected from reverse wiring at input and short circuit at output.
This product is geared to the OEM customer for low to high volumes. TE
stands ready to provide a custom design of the M5700 where the volume
and application warrants. Additional configurations not listed are either
available or possible. Please inquire for further information.
Applications
•
•
•
•
•
•
•
•
•
•
Tank Pressure and Level
Cryogenic Tanks
Pump and Compressor Controls
Marine and Water Systems
Agricultural Sprayers (Water, Fertilizer, Pesticide)
Fire Suppression Systems
Liquid Level Applications
Refrigeration Systems (Chillers)
Tractors (Hydraulic)
Outdoor Pressure Applications
TE CONNECTIVITY SENSORS
/// M5700
04/2018
Page 1
M5700
Submersible Liquid Level Pressure Transducer
STANDARD RANGES
Range (psi)
Range (bar)
0 to 030
0 to 2.1
0 to 050
0 to 3.5
0 to 100
0 to 007
0 to 200
0 to 014
0 to 300
0 to 020
0 to 500
0 to 035
0 to 01k
0 to 070
0 to 03k
0 to 200
0 to 05k
0 to 350
0 to 10k
0 to 700
0 to 15k
0 to 01k
Intermediate ranges available upon request.
Gage
•
•
•
•
•
•
•
•
•
•
•
Sealed
Compound
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
PERFORMANCE SPECIFICATIONS
Ambient Temperature: 25°C (unless otherwise specified)
PARAMETERS
MIN
Accuracy
(RSS of linearity, hysteresis, and repeatability)
Isolation, Body to any Lead
Dielectric Strength
Pressure Cycles
Proof Pressure
Burst Pressure
Long Term Stability (1 year)
Total Error Band (17-4PH)
Total Error Band (316L, ≤3000psi)
Total Error Band (316L, >3000psi)
Compensated Temperature
Operating Temperature
Storage Temperature
Gland Seal Pressure Rating
Load Resistance (R
L
)
Load Resistance (R
L
)
Current Consumption
Rise Time (10% to 90%)
Materials
Pressure Port
Snubber and Housing
Cable Anchor
Cable Sealing to Housing
Cable Jacket
Screen Cap
Weatherproof Grade
Gage Pressure Reference Vent
Shock
Vibration
For custom configurations, consult factory.
17-4PH or 316L Stainless Steel
316L Stainless Steel
316 or 316L Stainless Steel
FKM Fluoroelastomers
Polyurethane
Polyoxymethylene
IP68
Under 1000psi range, customer to ensure venting through mating connector
50g, 11msec Half Sine Shock per MIL-STD-202G, Method 213B, Condition A
±20g, MIL-STD-810C, Procedure 514.2, Fig 514.2-2, Curve L
R
L
> 100k
5
1.00E+6
2X
5X
-0.25
-1.0
-1.5
-2.0
-10
-10
-10
20k psi
20k psi
0.25
1.0
1.5
2.0
+60
+60
+60
300
< (Supply Voltage -9V) / 0.02A
-0.25
100
2
TYP
MAX
0.25
UNITS
%F.S. BFSL
MΩ
mA
0~FS Cycles
Rated
Rated
%F.S.
%F.S.
%F.S.
%F.S.
°C
°C
°C
psi
Ω
Ω
mA
Current Output
Voltage Output
Voltage Output
Over compensated range
Over compensated range
Over compensated range
@500V
DC
@500V
AC
, 1min
NOTES
<2ms (Voltage Output); <3ms (Current Output); Without Snubber
TE CONNECTIVITY SENSORS
/// M5700
04/2018
Page 2
M5700
Submersible Liquid Level Pressure Transducer
Notes
Compensated Temperature: The temperature range over which the product will produce an output proportional to pressure within the specified
performance limits.
Operating Temperature: The temperature range over which the product will maintain the IP68 rating.
Storage Temperature: The temperature range over which the product can be stored safely in occasions without pressure applied or power
input and remains rated performance. Beyond this temperature range may cause permanent damage to the product.
All configurations are built with voltage reverse and output short-circuit protections.
CE Compliance
EN 55022 Emissions Class A & B
IEC 61000-4-2 Electrostatic Discharge Immunity (8kV contact/15kV air)
IEC 61000-4-3 Radiated, Radio-Frequency Electromagnetic Field Immunity (10V/m, 80M-1GHz)
IEC 61000-4-4 Electrical Fast Transient Immunity (1kV)
IEC 61000-4-5 Surge Immunity (V+ to V-: ±2KV/42Ω; L to Case: ±1KV/12Ω; V- to V
0
: ±1KV/42Ω)
IEC 61000-4-6 Immunity to Conducted Disturbances Induced by Radio Frequency
Fields (150K~80MHz, 10V level for voltage output models, 3V level for current output model)
IEC 61000-4-9 Pulse Magnetic Field Immunity (100A/m peak)
For all CE compliance tests, max allowed output deviation ±1.5 %F.S.
TE CONNECTIVITY SENSORS
/// M5700
04/2018
Page 3
M5700
Submersible Liquid Level Pressure Transducer
DIMENSIONS [mm]
CODE
2
3
4
5
6
B
E
F
P
N
Q
S
U
W
G
Y
PRESSURE PORT TYPE
PORT
DIM B
1/4-19 BSPP
G3/8 JIS B2351
7/16-20UNF MALE SAE J1926-2
STRAIGHT THREAD O-RING
BUNA-N 90SH-904
0.472
[11.94]
0.540
[13.72]
0.433
[11.0]
0.600
[15.24]
0.390
[9.91]
0.472
[11.94]
0.500
[12.7]
0.771
[19.58]
0.687
[17.5]
0.687
[17.5]
0.374
[9.5]
0.433
[11.0]
0.472
[11.94]
0.551
[14.0]
0.433
[11.0]
0.46
[11.68]
DIM C
REF.
0.366
[9.3]
0.366
[9.3]
0.366
[9.3]
0.366
[9.3]
0.366
[9.3]
0.366
[9.3]
0.366
[9.3]
0.366
[9.3]
0.366
[9.3]
0.366
[9.3]
0.366
[9.3]
0.366
[9.3]
0.445
[11.3]
0.366
[9.3]
0.366
[9.3]
0.31
[7.87]
1/4-18 NPT
1/8-27 NPT
G1/4 JIS B2351
1/4-19 BSPT
1/4-19 BSPP FEMALE
(without snubber)
7/16-20UNF FEMALE SAE J514
STRAIGHT THREAD WITH
INTEGRAL VALVE DEPRESSOR
COMMON WATER LEVEL MEASUREMENT PORT
WITH DELRIN CAP WITH SCREEN
DIM B
7/16-20UNF FEMALE SAE
J513 STRAIGHT THREAD
M10 x 1.0 mm ISO 6149-2
M12 x 1.5 mm ISO 6149-2
G/14 DIN 3852 FORM E GASKET
DIN3869-14 NBR
M20 x 1.5 mm ISO 6149-2
M14 x 1.5 mm ISO 6149-2
7/8-20UNEF MALE WITH
POLYOXYMETHYLENE END CAP
.632
DIM C
PRESSURE PORT
'Y' OPTION
TE CONNECTIVITY SENSORS
/// M5700
04/2018
Page 4
M5700
Submersible Liquid Level Pressure Transducer
WIRING
CABLE
RED
BLK
GRN
WHT
DRAIN WIRE
CABLE WITH GLAND SEAL
4 WIRE,22AWG,SHIELD ,VENT TUBE
SUBMERSIBLE POLYURETHANE JACKETED CABLE
Connection (Current Output)
-SUPPLY
GROUND
BLK
DRAIN WIRE
Connection (Voltage Output)
+OUTPUT
COMMON
WHT
BLK
CONNECTION
CABLE
+SUPPLY
RED
P REF VENT
IN CABLE
CONNECTION
CABLE
+SUPPLY
RED
GROUND
DRAIN WIRE
P REF VENT
IN CABLE
Notes:
1. The drain wire is internally terminated to pressure port.
2. A psiG transducer requires a vent to atmosphere on the pressure reference. This is accomplished via a vent tube in the cable. The end of the cable
should be terminated to a clean dry area.
3. The IP68 rating is only met when the cable termination is to a dry clean area. Moisture can enter the transducer through the vent tube at the cable
termination.
OUTPUTS
CODE
3
4
5
6
7
8
9
OUTPUT SIGNAL
0.5 - 4.5V
RATIOMETRIC
1 - 5V
4 - 20mA
0 - 5V
0 - 10V
1 - 6V
0.5 - 4.5V
SUPPLY VOLTAGE
5 ± 0.25V
PROTECTED to 30V
8 - 30V
9 - 30V
8 - 30V
12 - 30V
8 - 30V
8 - 30V
TE CONNECTIVITY SENSORS
/// M5700
04/2018
Page 5
京公网安备 11010802033920号
EEWORLD
