P5-111139 datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Mechanical and electronic products> switch> P5-111139

P5-111139: DescriptionPushbutton Switch, SPST, On-off, Alternate, 10A, 28VDC, Solder Terminal, Panel Mount; CategoryMechanical and electronic products switch; File Size696KB，2 Pages; ManufacturerOTTO; Websitehttp://www.ottoexcellence.com

Download Datasheet Parametric View All

P5-111139 Overview

Pushbutton Switch, SPST, On-off, Alternate, 10A, 28VDC, Solder Terminal, Panel Mount

P5-111139 Parametric

Parameter Name	Attribute value
Objectid	1723569889
Reach Compliance Code	unknown
ECCN code	EAR99
YTEOL	9.2
Actuator angle
Actuator length	0.25 inch
Actuator material	NYLON
Actuator stroke	4.572 mm
Actuator type	PUSHBUTTON
Other features	WHITE, UNSEAL RED BEZ
body height	20.66 mm
Body length or diameter	15.82 mm
Nozzle length
Center contact plating	SILVER
Contact (AC) maximum rated load I	5A@115VAC
Contact (AC) maximum rated load M	3A@115VAC
Contact (AC) maximum rated R load	10A@115VAC
Maximum contact current (AC)	10 A
Maximum contact current (DC)	10 A
Contact (DC) maximum rated R load	10A@28VDC
Contact function	ON-OFF
contact time	SNAP ACTION
Maximum contact voltage (AC)	115 V
Maximum contact voltage (DC)	28 V
Dielectric withstand voltage	1050VRMS V
Electrical life	25000 Cycle(s)
End contact plating	SILVER
Shell material	ALUMINUM ALLOY
JESD-609 code	e4
Manufacturer's serial number	P5
Installation features	PANEL MOUNT
Maximum operating force	17.79 N
seal	EPOXY
surface mount	NO
Switch action	ALTERNATE
switch function	SPST
Switch type	PUSHBUTTON SWITCH
Terminal surface	GOLD/SILVER
Terminal length	0.156 inch
Termination type	SOLDER

Preview

Download Datasheet

View All

ALTERNATE

ACTION

ALTERNATE ACTION PUSHBUTTONS

SEALED AGAINST DUST & MOISTURE

The P5 Alternate Action switches match the P1, P3 and P8

Momentary Action Pushbutton models for mixed function

with common panel appearance. Now you can design panels

with both alternate and momentary action switches and have

uniform panel appearance. The P5 features alternate action

in the same pushbutton and housing configuration as the

momentary P1 and P3 and as a bonus, the P5 requires less

behind the panel space than the P1 and P3 momentary versions.

Push and the P5 switch turns “on.” Push again and the P5 switch

turns “off.” Positive tactile feedback is featured so the operator

is clearly aware the switch mode has been executed. The button

returns to the original position after each actuation.

To guard against front panel splash and dirt, the P5 series

is sealed at the button with OTTO’s patented “rolling

sleeve”principle. The terminals are sealed with epoxy, providing

a seal against flux during wiring and behind panel dirt and

moisture. The combination of sealing provides smooth operation

over a wide temperature range. Watertight sealing to IP68S is

available.

A vandal resistant style is available in the P5-V series. Custom

housings, shrouded buttons, contact configurations and

materials are available to suit your application requirements. We

also provide custom button engraving with epoxy ink backfill,

watertight versions and other special characteristics.

, Push O

“Push On

ff” action

Style P5-4

Style P5-3

Style P5-6

Style P5-1

Standard Characteristics/Ratings:

ELECTRICAL RATINGS:

Load

Resistive

Inductive

Lamp

Motor

DWV

Low Level

Electrical Life:

Mechanical Life:

Seal:

Operating Force:

Total Travel:

Overtravel:

Sea Level @ 28VDC

or 115VAC, 60/400Hz

10A

1050Vrms

10mA @ 30mV

25,000 cycles

1,000,000 cycles

IP64 & MIL-PRF-8805 Design 2 or IP68S

3.0 lbs. +1/-0.5 lb.

0.180 inches max

0.012 inches min

Features:

• Button sealed with patented “rolling sleeve” principle

• Contact area sealed at case & terminals

• Moistureproof & dusttight to IP64 & MIL-PRF-8805

Design 2 or watertight to IP68S

• Less than 25mΩ contact resistance

• Handles low level up to 10 amps

• Variety of mounting styles

• Engraved buttons available

• Choice of 9 button & 3 bezel colors

• Panel appearance matches most other OTTO

momentary pushbutton switches

• Unsealed construction also available

• RoHS/WEEE/Reach compliant

Operating Temp Range:

-55°C to +85°C

MATERIALS:

Case:

Button:

Terminals:

Terminal Hardware:

Mounting Hardware:

Anodized aluminum alloy

Thermoplastic

Brass, silver plate or gold plate for low level

Terminal lugs, lockwasher and screw for screw terminal option

Hex nut, lockwasher and panel seal on watertight switches

119

OTTO Full Line Catalog

Specifications Subject To Change Without Notice

Recommended Resources

Precision photodiode detector circuit diagram

Transistor self-excited multivibrator circuit

A more complete anti-stop vibration circuit

Sanle brand WP-650D computerized microwave oven circuit diagram

Interlock application circuit of TWH9238

Single-phase motor thyristor electronic stepless speed regulation circuit

Playing with Zynq Serial 50——[ex69] FIR filter IP simulation example: [i=s] This post was last edited by ove learning makes me happy on 2020-3-3 09:13 [/i]1 Introduction to FIR FilterFIR ( Finite Impulse Response ) filter, also known as finite impulse response filter, i...; ove学习使我快乐 FPGA/CPLD

Five solutions to common wireless transmission delay problems: We all know that wireless signals are very susceptible to interference. When using wireless technology for wireless transmission, people subconsciously think that it has problems with slow speed and h...; 蓝先生 RF/Wirelessly

I am quite confused about the following constant current circuit: [i=s]This post was last edited by Xiaotaiyangyy on 2021-7-16 09:49[/i]If the R1 analyzed above does not work, what is the point of talking about constant current control? Also, constant current can be...; 小太阳yy Analog electronics

Installation of the digital multimeter + RL78G14 development environment based on the serial port: Namisoft shares its experience with you on the installation of the serial digital multimeter + RL78G14 development environmentAs shown in the figure , NS-Multimeter recommends using UltraISO to make t...; 海大叔 Integrated technical exchanges

【Recruitment】Full-time and part-time RF engineers: A chip technology company in Beijing is recruiting ( chip design engineer)Job description:1. Responsible for the design of RF, microwave, and millimeter wave integrated circuit chips; 2. Responsible f...; 芯2020 Recruitment

Explore Ultra-Wideband (UWB) Technology: Editor's Note: Qorvo has launched a series of technical science documents. In this series, we will talk about the recently popular UWB. In this chapter, we introduce how positioning technology started...; 石榴姐 RF/Wirelessly

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components