Parallel - Fundamental Quartz Crystal, 19.999MHz Nom, SMD, 4 PIN
ABM82-19.999MHZ-6-3G Parametric
Parameter Name
Attribute value
Is it Rohs certified?
conform to
Objectid
7252646508
package instruction
SMD, 4 PIN
Reach Compliance Code
compliant
Country Of Origin
Mainland China
YTEOL
7.2
Ageing
2 PPM/FIRST YEAR
Crystal/Resonator Type
PARALLEL - FUNDAMENTAL
Drive level
10 µW
frequency stability
0.0015%
frequency tolerance
25 ppm
JESD-609 code
e4
load capacitance
6 pF
Installation features
SURFACE MOUNT
Nominal operating frequency
19.999 MHz
Maximum operating temperature
60 °C
Minimum operating temperature
-10 °C
physical size
3.2mm X 2.5mm X 0.6mm
Series resistance
70 Ω
surface mount
YES
Terminal surface
Nickel/Gold (Ni/Au)
ABM82-19.999MHZ-6-3G Preview
CERAMIC SMD CRYSTAL
ABM8
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture
Sensitive - MSL = N/A: Not Applicable
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
FEATURES:
• Seam sealed package assures high reliability
• Tight tolerance and stability available
• Suitable for RoHS reflow
APPLICATIONS:
• High density applications
• Modems, communication and test equipment
• PMCIA, Wireless applications
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Operation Mode
Operating Temperature
Storage Temperature
Frequency Tolerance @+25°C
Frequency Stability over the Operating
Temperature ( ref. to +25°C)
Equivalent series resistance (R1)
Shunt capacitance (C0)
Load capacitance (CL)
Drive Level
Aging
Insulation Resistance
TABLE 1- Standard ESR
Frequency (MHz)
10.000 -11.999 (Fund)
12.000 -15.999 (Fund)
16.000 -19.999 (Fund)
20.000 - 29.999 (Fund)
-2
500
ESR( )
max
200
120
70
50
Minimum
10.000
Typical
Maximum
125.000*
Units
MHz
Notes
Contact Abracon for
available F<10MHz
10MHz - 54MHz
64MHz - 125MHz
Please contact Abracon for
available frequencies
Fundamental
3rd Overtone
(Standard Frequencies: 64, 66, 66.6666, 75,
80, 98.304, 100, 125MHz)
-10
+60
-55
+125
-50
+50
-50
See table 1 below
3.0
18.0
10
100
+2
+50
ºC
ºC
ppm
ppm
pF
pF
µW
ppm
M
(see options if other than STD)
Standard
Standard
Standard
(see options if other than STD)
(see options if other than STD)
Standard
(See options if
other than STD)
@25°C±3°C
First year
@ 100Vdc ± 15V
ESR( )
max
40
35
120
80
Frequency (MHz)
30.000 - 39.999 (Fund)
40.000 - 54.000 (Fund)
64.000 - 80.000 (3rd OT)
98.304 - 125.000 (3rd OT)
OPTIONS AND PART IDENTIFICATION: (Left blank if standard)
ABM8
Height (mm)
Blank: 0.80 max
1: 0.65±0.05
2: 0.60±0.10
Frequency in MHz
Please specify the
frequency in MHz.
e.g. 16.000MHz
Load Capacitance (pF)
Please specify CL (min
6pF) in pF or S for series
Custom ESR if
other than standard
R
: Specify a value in
(e.g.: R40)
Operating Temp.
E
Blank: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
J**: -40°C ~ +105°C
K**: -40°C ~ +125°C
** Frequency stability ±
50ppm and ± 100 ppm
-
MHz -
-
-
-
Packaging
Blank: Bulk
T: 1kpcs / reel
T2: 250pcs / reel
T3: 3kpcs / reel
Freq. Stability
Blank: ± 50 ppm
U: ± 10 ppm(*)
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Q: ± 100 ppm
(*) Option E, B, and
-10°C to +60°C only.
Freq. Tolerance
Blank: ± 50 ppm
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 07-1-20
ISO9001-2015
CERTIFIED
CERAMIC SMD CRYSTAL
ABM8
OUTLINE DRAWING:
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
Note:
Due to material availability, the chamfer could be located
on pin #1, 3, or 4. Be advised that the chamfer location has
no impact on the electrical performance of the device.
Table 2
Height (mm)
ABM8
0.80 max
ABM81
0.65+/-0.05
ABM82
0.60+/-0.10
Dimensions: mm
TAPE & REEL:
Option "-T"
: Tape and reel (1,000pcs/reel) : ABM8, ABM82
Tape and reel (3,000pcs/reel) : ABM81
Option "-T2" : Tape and reel (250pcspcs/reel) : ABM8
Option "-T3" : Tape and reel (3,000pcs/reel) : ABM8, ABM82 only
REFLOW PROFILE:
Zone
1
2
3
Dimensions: mm
Description
Temperature
Time
Preheat
Reflow
Peak heat
T
SMIN
~ T
SMAX
150°C ~ 180°C
T
L
230°C
T
P
260°C
±
5°C
60 ~ 120 sec.
30 ~ 40 sec.
10 sec. MAX
ATTENTION:
Abracon LLC’s products are COTS – Commercial-O -The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
Abstract: This article uses the Smith chart as a design guide for RF impedance matching. Examples of plotting reflection coefficient, impedance, and admittance are given, as well as an example of plot...
In circuit design and PCB production, we often encounter power symbols: VCC, VDD, VEE, VSS. What is the relationship between them? 1. Explanation VCC: C=circuit means circuit, that is, the voltage c...
[i=s]This post was last edited by yhye2world on 2019-8-6 13:06[/i]1. Application scenario:used to measure the displacement of the tip of a signature pen;
The displacement sensor is installed inside th...
The AIOT industry is changing rapidly, and the demand for lightweight operating systems is stronger than ever. How can developers meet new opportunities and challenges in this wave?
The 2020 RT-Thread...
The first time data is received and read, it is normal. The second time data is sent, the message object does not change, and the previous data will be re-read during the next interrupt. Why is this?...
On December 21, South Korean Deputy Prime Minister and Minister of Strategy and Finance Hong Nam-ki proposed ambitious development goals when presiding over the Innovation Growth Conference: the gove...[Details]
4.1. Processor, device 4.2. Description
Device description is mainly completed by two structures: struct resource and struct platform_device.
Let's take a look at the definitions of these two struc...[Details]
I made a learning infrared remote control switch using STc15f104e. It is power-on learning without buttons. = The power-on learning indicator light flashes, press the remote control, the indicator l...[Details]
Mobile wallet and digital key binding process
When users use car digital keys, they may be bound to mobile wallet APPs. The above is a flowchart drawn based on course materials and the o...[Details]
Experimental description: The initial value in the source program is calculated as 0xf7, and the program is counted using the timing counting method 2. When the program starts running, each time the ...[Details]
The new year's Fortune Global 500 list has just been released. With the inclusion of Hong Kong, Macao and Taiwan, the number of Chinese companies on the list has unprecedentedly surpassed that of the...[Details]
According to a report by Expert Market Research, the global machine vision market size reached approximately USD 10.88 billion in 2023.
The market is expected to grow at a compound annual growt...[Details]
Qorvo® , Inc. (Nasdaq: QRVO), a leading provider of innovative RF solutions that connect the world, today introduced the first Band 47/Wi-Fi bulk acoustic wave (BAW) coexistence filter and V2X front...[Details]
According to blogger @数码闲聊站’s news today, the engineering version of a new Redmi phone was exposed. The phone will focus on high cost performance, support 120Hz high refresh rate, have a 5000mAh batt...[Details]
Battery Energy Storage System (BESS) Nidec ASI Co., Ltd., a subsidiary of Nidec Co., Ltd.'s Sports & Energy Business Division, and French renewable energy developer Neoen have signed two installat...[Details]
introduction
LED lighting
has quickly gained popularity among users
for
its advantages of high
luminous efficiency
, long service life,
simple
brightness
...[Details]
PIC 8-bit microcontrollers have only one interrupt entry (16-bit and 32-bit microcontrollers have multiple interrupts), so there can only be one interrupt subroutine in the program. If two or more int...[Details]
When charging NiMH and NiCd batteries , how to keep them within the best time period so that they are fully charged and not overcharged? This is the most important issue for consumers who use the a...[Details]
Software version: MPLAB 4.15 Burning tool: PICKIT 3.0 Implementation: Use PICKIT 3.0 to power the target chip and burn the hex file 1. Open the software MPLAB IPE v4.15, connect PICKIT 3.0 and the ...[Details]
On November 12, according to a press release on the official website of the South Korean Ministry of Trade, Industry and Energy, Japan's JSR, a semiconductor photoresist giant, held a groundbreakin...[Details]
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
