SCUSB Evaluation Kit
Operator’s Instruction Manual
Cardinal Components, Inc.
155 Rt 46 West
Wayne, N.J. 07470
(973) 785-1333
www.cardinalxtal.com
Copyright 2003, Cardinal Components Inc.
All Rights Reserved
All attempts have been made to make the information in this manual
complete and accurate. Cardinal Components Inc. is not responsible for any
direct or indirect damages or loss of business resulting from inaccuracies or
omissions. The specifications within this document are subject to change
without notice.
SCUSB Evaluation Kit
Software License Agreement
All products (including the SCUSB Evaluation Kit, CD’s software and
documentation) are subject to the terms stated below. If you disagree with the terms
please return the Product and documentation to Cardinal Components, postage
prepaid, within seven days of receipt and Cardinal will provide you with a refund,
less freight and normal handling charges.
1. You may not copy or reproduce all or any part of the Product, except as
authorized in item 2 below. Removal, emulation or reverse engineering of all or
any part of the Product constitutes an unauthorized modification of the Product
and is specifically prohibited. Nothing in this license permits you to derive the
source code of the software files that Cardinal has provided to you. Cardinal
provides no other warranty to any person, other than the limited warranty
provided to the original purchaser of this product.
2. You may make archival copies of the software files. All software files remain
Cardinal exclusive property.
3. No license is granted to sell, license, distribute, market or otherwise dispose of
any software files or other components of the Product.
4. Cardinal warrants the Product and the media on which the software files are
provided to be substantially free from significant defects in material and
workmanship under normal use for the period of twelve months from the date of
delivery of the Product to you. In the event of a claim under this warranty,
Cardinal’s sole obligation is to replace or repair, at Cardinal’s option, any Product
free of charge.
5. Warrants and claims must be made in writing during the warranty period or
within seven days of the observed defect, accompanied by evidence of
satisfactory to Cardinal. Prior to returning any Product to Cardinal, you must
obtain a Return Authorization (RMA) number and shipping instructions from
Cardinal. Products returned to Cardinal shall be shipped with freight and
insurance paid.
Table of Contents
SECTION 1.0
1.1
1.2
GETTING STARTED
Introduction
Software Installation
JEDEC Creator
SECTION 2.0
2.1
Running the JEDEC Creator Program
2.1.1 Entering PLL Frequencies
2.1.2 Selecting Divider Values
2.1.3 saving the file to disc
SECTION 3.0
3.1
3.2
Introduction
Using the SCUSB Evaluation Kit
Running the Reconfiguration Program
3.2.1
3.2.2
3.2.3
3.2.4
Writing a group to EEPROM
Reading a group from EEPROM
Clearing a group from EEPROM
Reconfiguring an Oscillator
3.3
Memory Map
3.3.1 Viewing the Hex File
3.3.2 Saving the Hex File
SECTION 4.0
Testing Oscillator Outputs
SECTION 1.0
1.1
Introduction
GETTING STARTED
The SCUSB evaluation kit is an assembled and tested PC Board
That demonstrates the Multiple Output and Single Output series of
reconfigurable oscillators.
The evaluation kit consists of a circuit board assembly with 6
SMA connectors, which allow probing and frequency measurement of
the 6 available outputs. Also included with the evaluation kit is a
smaller daughter board, which connects to a PC via a USB port. Using
these 2 boards together allows communication and reconfiguration of
all of the reconfigurable series oscillators. The kit can also be
configured to interface with a microcontroller through the I
2
C
connector for stand-alone operation.
The Windows® 98SE/ME/2000/XP compatible software
provides a user-friendly interface to demonstrate the features of the
Multiple Output oscillators.
With optional adaptor sockets, the 14 pin SMT multiple output
and the 8 pin SMT single output oscillators can be reconfigured.
Equipment supplied with the SCUSB Evaluation Kit.
Test board with attached communications daughter board.
USB cable
Software CD for use on a PC (including all necessary USB drivers)
Required Equipment.
Compatible PC running Windows 98SE/ME/2000/XP
Minimum screen resolution 1024 x 768
Available USB Port
Optional Equipment
SC3600 Socket (used to reconfigure the 8 pin Single Output SMT oscillator)
SC3700 Socket (used to reconfigure the 14 pin Multiple Output Smt
Oscillator)
1.2
Software Installation
Insert the enclosed CD into the CD Rom drive. Run the Setup
file and install to the directory of your choice.
This installation will install the SCUSB reconfig software and
also will load the JEDEC Creator program.
京公网安备 11010802033920号
EEWORLD
