ACAC 0612, ACAS 0612 - Precision
Vishay Beyschlag
Precision Thin Film Chip Resistor Array
FEATURES
•
Advanced thin film technology
•
Two pairs or four equal resistor values
•
TCR tracking down to 10 ppm/K (± 5 ppm/K)
•
Tolerance matching down to 0.1 % (± 0.05 %)
•
Pure Sn termination on Ni barrier layer
ACAC 0612 (concave terminations) and ACAS 0612 (convex
terminations) thin film chip resistor arrays combine the
proven reliability of precision thin film chip resistor products
with the advantages of chip resistor arrays. Defined
tolerance matching and TCR tracking make this product
perfectly suited for applications with outstanding
requirements towards stable fixed resistor ratios. A small
package enables the design of high density circuits in
combination with reduction of assembly costs. Four equal
resistor values or two pairs are available.
•
Compliant to RoHS directive 2002/95/EC
APPLICATIONS
•
Precision analogue circuits
•
Voltage divider
•
Feedback circuits
•
Signal conditioning
TECHNICAL SPECIFICATIONS
DESCRIPTION
EIA size
Metric size
Configuration, isolated
Design:
All equal
Two pairs
Resistance values
Absolute tolerance
Tolerance matching
(2)
Absolute temperature coefficient
Temperature coefficient tracking
(2)
Max. resistance ratio
R
min.
/R
max.
Rated dissipation:
P
70 (3)
Element
Package, 4 x 0603
Operating voltage
Permissibe film temperature
Insulation voltage (U
ins
) against ambient and between isolated
resistors, continuous
ACAC 0612, ACAS 0612
0612
RR 1632M
4 x 0603
AE
TP
47
Ω
to 221 kΩ
(1)
± 0.5 %; ± 0.25 %
0.5 % (equivalent to ± 0.25 %)
0.25 % (equivalent to ± 0.125 %)
0.1 % (equivalent to ± 0.05 %)
± 50 ppm/K; ± 25 ppm/K
50 ppm/K (equivalent to ± 25 ppm/K)
25 ppm/K (equivalent to ± 12.5 ppm/K)
15 ppm/K (equivalent to ± 7.5 ppm/K)
10 ppm/K (equivalent to ± 5 ppm/K)
1:5
0.1 W
0.3 W
75 V
125
°C
(4)
75 V
Notes
(1)
Resistance values to be selected from E24 and E96
(2)
In applications with defined resistance ratios like voltage dividers or feedback circuits, an array with a defined tracking of e.g. 10 ppm/K is
required to replace discrete resistors with a temperature coefficient of resistance of ± 5 ppm/K. Furthermore, in order to achieve the same
tolerance of ± 0.05 % of individual resistors, an array requires a matching of 0.1 %.
(3)
Please refer to APPLICATION INFORMATION, see below
(4)
For higher max. film temperature and AEC-Q200 qualification please refer to data sheet ACAS 0606 AT, ACAS 0612 AT - Precision available
on our web site at
www.vishay.com/doc?28770
www.vishay.com
276
For technical questions, contact:
thinfilmarray@vishay.com
Document Number: 28751
Revision: 19-Nov-09
ACAC 0612, ACAS 0612 - Precision
Precision Thin Film Chip Resistor Array
Vishay Beyschlag
APPLICATION INFORMATION
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support
of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not
exceeded. These resistors do not feature a limited lifetime when operated within the permissible limits.
MAXIMUM RESISTANCE CHANGE AT RATED POWER
DESCRIPTION
Configuration, isolated
Operation mode
Rated power per element,
P
70
Rated power per packaging,
P
70
Film temperature
Operating voltage,
U
max.
AC/DC
Max. resistance change at
P
70
ΔR/R
max., after:
1000 h
8000 h
Max. relative resistance change (relative drift) at
P
70
ΔR/R
max., after:
1000 h
8000 h
Notes
(1)
Figures are given for arrays with equal values, design type AE
(2)
Equivalent to ± 0.05 %
(3)
Equivalent to ± 0.125 %
(4)
Equivalent to ± 0.25 %
0.1 %
(2)
0.25 %
(3)
± 0.1 %
± 0.25 %
Precision
0.032 W
0.1 W
85 °C
25 V
(1)
ACAC 0612, ACAS 0612
4 x 0603
Standard
0.1 W
0.3 W
125 °C
75 V
± 0.25 %
± 0.5 %
0.25 %
(3)
0.5 %
(4)
SKETCHES
R
1
R
2
R
3
R
4
ACAC 0612, ACAS 0612
DESIGN
TYPE
AE
TP
ACAC 0612, ACAS 0612
R
1
=
R
2
=
R
3
=
R
4
R
1
=
R
4
<
R
2
=
R
3
Document Number: 28751
Revision: 19-Nov-09
For technical questions, contact:
thinfilmarray@vishay.com
www.vishay.com
277
ACAC 0612, ACAS 0612 - Precision
Vishay Beyschlag
Precision Thin Film Chip Resistor Array
PART NUMBER AND PRODUCT DESCRIPTION
(1)
PART NUMBER: ACASA1100A2200P500
A
C
A
S
A
1
1
0
0
A
2
2
0
0
P
5
0
0
MODEL
ACA
TERMINAL
C
= Concave
S
= Convex
square
SIZE
A
= 0612
RESISTANCE
VALUE
(2)
3 digit
resistance
value
R
1
,
R
4
1 digit multiplier
MULTIPLIER
9
= *10
-1
0
= *10
0
1
= *10
1
2
= *10
2
3
= *10
3
ACCURACY
GRADE
(3)
TCR, tracking,
tolerance and
matching
A, B, E, F,
J, K, N
or
P
RESISTANCE
VALUE
(2)
3 digit
resistance
value
R
2
,
R
3
1 digit multiplier
MULTIPLIER
9
= *10
-1
0
= *10
0
1
= *10
1
2
= *10
2
3
= *10
3
PACKAGING
(4)
P1
P5
SPECIAL
00
= Standard
PRODUCT DESCRIPTION: ACAS 0612 110R A 220R P5
ACA
MODEL
ACA
= Chip
array
S
TERMINATION
C
= Concave
S
= Convex
square
0612
SIZE
0612
110R
RESISTANCE
VALUE
R
1
,
R
4 (2)
110R
= 110
Ω
1K1
= 1.1 kΩ
22K1
= 22.1 kΩ
A
ACCURACY
GRADE
(3)
TCR, tracking,
tolerance and
matching
A, B, E, F,
J, K, N
or
P
220R
RESISTANCE
VALUE
R
2
,
R
3 (2)
220R
= 220
Ω
1K1
= 1.1 kΩ
22K1
= 22.1 kΩ
P5
PACKAGING
(4)
P1
P5
Notes
(1)
Products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION
(2)
R
=
R
≤
R
=
R
1
4
2
3
(3)
Please refer to table TEMPERATURE COEFFICIENT AND RESISTANCE RANGE, see below
(4)
Please refer to table PACKAGING, see next page
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
DESCRIPTION
ACCURACY
GRADE
A
B
E
F
J
K
N
P
ABSOLUTE TCR
± 25 ppm/K
± 25 ppm/K
± 25 ppm/K
± 25 ppm/K
± 25 ppm/K
± 25 ppm/K
± 50 ppm/K
± 50 ppm/K
TCR TRACKING
(5)
10 ppm/K
10 ppm/K
15 ppm/K
15 ppm/K
25 ppm/K
25 ppm/K
25 ppm/K
50 ppm/K
ABSOLUTE
TOLERANCE
± 0.25 %
± 0.5 %
± 0.25 %
± 0.5 %
± 0.25 %
± 0.5 %
± 0.5 %
± 0.5 %
TOLERANCE
MATCHING
(5)
0.1 %
0.25 %
0.1 %
0.25 %
0.1 %
0.25 %
0.5 %
0.5 %
RESISTANCE VALUE
ACAC 0612, ACAS 0612
47
Ω
to 221 kΩ
47
Ω
to 221 kΩ
47
Ω
to 221 kΩ
47
Ω
to 221 kΩ
47
Ω
to 221 kΩ
47
Ω
to 221 kΩ
47
Ω
to 221 kΩ
47
Ω
to 221 kΩ
Note
(5)
Please refer to TECHNICAL SPECIFICATIONS, Note
(2)
, see above
www.vishay.com
278
For technical questions, contact:
thinfilmarray@vishay.com
Document Number: 28751
Revision: 19-Nov-09
ACAC 0612, ACAS 0612 - Precision
Precision Thin Film Chip Resistor Array
Vishay Beyschlag
PACKAGING
PACKAGING CODE
MODEL
TAPE WIDTH
DIAMETER
PIECES
PITCH
PAPER TAPE
ACAC 0612
ACAS 0612
8 mm
8 mm
180 mm/7"
180 mm/7"
1000
5000
4 mm
4 mm
P1
P5
DIMENSIONS ACAC 0612
W
T
I
1
T
1
W
T
I
2
T
2
Top view
Bottom view
DIMENSIONS
- Chip resistor array, mass and relevant physical dimensions
TYPE
ACAC 0612
L
(mm)
W
(mm)
H
(mm)
P
(mm)
W
T
(mm)
T
1
(mm)
T
2
(mm)
d
(mm)
l
1
(mm)
l
2
(mm)
MASS
(mg)
9.6
1.6 ± 0.15 3.2 ± 0.15 0.55 ± 0.1 0.8 ± 0.1 0.5 ± 0.15 0.3 ± 0.15 0.4 ± 0.15 0.3 ± 0.1 min. 0.15 min. 0.25
DIMENSIONS ACAS 0612
W
A
T
2
T
1
L
H
A
1
A
DIMENSIONS
- Chip resistor array, mass and relevant physical dimensions
TYPE
ACAS 0612
L
(mm)
1.5 ± 0.15
W
(mm)
3.2 ± 0.15
H
(mm)
0.45 ± 0.1
P
(mm)
0.8 ± 0.1
A
1
(mm)
0.6 ± 0.1
A
(mm)
0.4 ± 0.1
T
1
(mm)
0.3 ± 0.15
T
2
(mm)
0.4 ± 0.15
MASS
(mg)
6.6
Document Number: 28751
Revision: 19-Nov-09
For technical questions, contact:
thinfilmarray@vishay.com
www.vishay.com
279
ACAC 0612, ACAS 0612 - Precision
Vishay Beyschlag
Precision Thin Film Chip Resistor Array
PATTERN STYLES FOR CHIP RESISTOR ARRAYS
ACAC 0612
0.1
Y
Z
G
Y
G
Z
ACAS 0612
U
I
X
Dimensions in mm
limits for solder resist
X
I
P
P
0.1
RECOMMENDED SOLDER PAD DIMENSIONS FOR CHIP RESISTOR ARRAYS
TYPE
ACAC 0612
ACAS 0612
G
(mm)
0.7
0.7
Y
(mm)
0.7
0.7
X
(mm)
0.5
0.64
U
(mm)
-
0.5
Z
(mm)
2.1
2.1
I
(mm)
0.3
0.3
P
(mm)
0.8
0.8
DESCRIPTION
The production of the components is strictly controlled and
follows an extensive set of instructions established for
reproducibility. A homogeneous film of metal alloy is
deposited on a high grade (96 % Al
2
O
3
) ceramic substrate
using a mask to separate the adjacent resistors and
conditioned to achieve the desired temperature coefficient.
Specially designed inner contacts are realized on both sides.
A special laser is used to achieve the target value by
smoothly cutting a meander groove in the resistive layer
without damaging the ceramics.
The resistor elements are covered by a protective coating
designed for electrical, mechanical and climatic protection.
The terminations receive a final pure tin on nickel plating.
The result of the determined production is verified by an
extensive testing procedure and optical inspection
performed on 100 % of the individual chip resistors. Only
accepted products are laid directly into the paper tape in
accordance with
IEC 60286-3
(3)
.
ASSEMBLY
The resistors are suitable for processing on automatic
SMD assembly systems. They are suitable for automatic
soldering using reflow or vapour phase as shown in
IEC 61760-1
(3)
. For ACAC resistor arrays automatic
soldering using wave can also be used. The encapsulation is
resistant to all cleaning solvents commonly used in the
electronics industry, including alcohols, esters and aqueous
solutions.
The suitability of conformal coatings, if applied, shall be
qualified by appropriate means to ensure the long-term
stability of the whole system. The resistors are RoHS
compliant; the pure tin plating provides compatibility with
lead (Pb)-free and lead-containing soldering processes. The
permitted storage time is 20 years, whereas the solderability
is specified for 2 years after production or requalification. The
immunity of the plating against tin whisker growth has been
proven under extensive testing.
All products comply with the
GADSL
(1)
and the
CEFIC-EECA-EICTA
(2)
list of legal restrictions on
hazardous substances. This includes full compliance with
the following directives:
•
2000/53/EC End of Vehicle life Directive (ELV) and
Annex II (ELV II)
•
2002/95/EC Restriction of the use of Hazardous
Substances directive (RoHS)
•
2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
TESTS
Where applicable, the resistors are tested in accordance with
EN 140401-801
which refers to
EN 60115-1
and
EN 140400.
Notes
(1)
Global Automotive Declarable Substance List, see
www.gadsl.org
(2)
CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade
organisation representing the information and communications technology and consumer electronics), see
www.eicta.org
→
policy
→
environmental policy group
→
chemicals
→
jig
→
Joint Industry Guide (JIG-101 Ed 2.0)
(3)
The quoted IEC standards are also released as EN standards with the same number and identical contents
www.vishay.com
280
For technical questions, contact:
thinfilmarray@vishay.com
Document Number: 28751
Revision: 19-Nov-09
京公网安备 11010802033920号
EEWORLD
