-
introduction In the process control of modern process industry, analytical detection has the characteristics of online, multi-component and real-time detection, and has strict requirements on a...[Details]
-
On April 16, CATL and Chery Automobile jointly announced that CATL's sodium-ion batteries will be first launched in Chery models. As early as July 29, 2021, CATL released the first generation of sodiu...[Details]
-
Hong Kong - Media OutReach - July 26, 2023 - Southco, the world's leading provider of engineered hardware solutions, recently launched a universal door lock sensor designed to improve cabinet securit...[Details]
-
The author of this article is an electronic engineer with more than 30 years of experience, and has dabbled in many technical fields, including digital, analog, power, communication, microcontrolle...[Details]
-
There are two options: either run stand-alone ICL commands (similar to sending stand-alone SCPI commands) or write test scripts in the Test Script Language. Test Script Language (TSL) is a programmin...[Details]
-
In FPGA system design, maximizing performance requires balancing components with mixed performance efficiencies, including logic fabric, on-chip memory, DSP, and I/O bandwidth. In this article, I'll e...[Details]
-
According to foreign media reports, researchers from the Massachusetts Institute of Technology (MIT) and Tsinghua University have collaborated to develop the safety limits of lithium-ion batteries fo...[Details]
-
Even if this is an environment it has never seen before, the system should be able to cope with it smoothly MIT is working on a new method to allow self-driving cars to navigate unfamiliar areas by...[Details]
-
In electronic engineering, resource exploration, instrumentation and other related applications, frequency measurement is one of the most basic and common measurements in electronic measurement tec...[Details]
-
I. Overview: The s3c2440A provides three independent asynchronous serial ports, each of which can operate in interrupt mode and DMA mode, that is, the UART can generate an interrupt or DMA request fo...[Details]
-
Non-contact measurement of object displacement is one of the important development directions of displacement measurement technology. This is because non-contact measurement methods have the advant...[Details]
-
Improving the Measurement Accuracy of Low Noise Amplifier Based on Network Analyzer
1. Characteristics and applications of low noise amplifiers
LNA is mainly used to amplify weak signals, amplify...[Details]
-
1. Subject requirements:
Carefully analyze the principles of the MCU operating system RTX51, transplant it to the MCU experimental platform, and require writing a short program to verify the c...[Details]
-
The principle of condenser microphone
Condenser microphones use the change in capacitance to convert sound signals into electrical signals. This type of microphone is the most common, and the ...[Details]
-
Teledyne e2v EV10AS940: State-of-the-art 10-bit wideband data converter
Superior microwave RF direct conversion sampler to over 35 GHz
Wireless signal baluns are used ...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD