5.0 mm x 3.2 mm Package Pinout ............................................................................................................................................... 1
Ordering Information .................................................................................................................................................................... 2
Device Configurations and Pin-outs ............................................................................................................................................. 9
Pin-out Top Views................................................................................................................................................................. 9
Test Circuit Diagrams for LVCMOS and Clipped Sinewave Outputs ......................................................................................... 10
Frequency Stability ............................................................................................................................................................. 16
Output Frequency and Format............................................................................................................................................ 16
Output Frequency Tuning ................................................................................................................................................... 16
Pin 1 Configuration (OE, VC, or NC) .................................................................................................................................. 17
Control Voltage Bandwidth ................................................................................................................................................. 20
Pull Range and Average Pull Range .................................................................................................................................. 22
Output Frequency ............................................................................................................................................................... 23
2
I C Control Registers .......................................................................................................................................................... 25
Serial Interface Configuration Description .......................................................................................................................... 28
Serial Signal Format ........................................................................................................................................................... 28
Parallel Signal Format ........................................................................................................................................................ 29
Parallel Data Format ........................................................................................................................................................... 29
2
I C Timing Specification ...................................................................................................................................................... 31
2
I C Device Address Modes ................................................................................................................................................. 32
Schematic Example ............................................................................................................................................................ 33
Dimensions and Patterns ........................................................................................................................................................... 34
Additional Information ................................................................................................................................................................ 36
Revision History ......................................................................................................................................................................... 37
Rev 1.05
Page 3 of 38
www.sitime.com
SiT5156
1 MHz to 60 MHz, ±0.5 to ±2.5 ppm, Elite Platform™ Super-TCXO
Electrical Characteristics
All Min and Max limits are specified over temperature and rated operating voltage with 15 pF output load unless otherwise
stated. Typical values are at 25°C and 3.3V Vdd.
Table 1. Output Characteristics
Parameters
Nominal Output Frequency Range
Operating Temperature Range
Symbol
F_nom
T_use
Min.
1
-20
-40
-40
Frequency Stability over
Temperature
Initial Tolerance
Supply Voltage Sensitivity
F_stab
–
–
–
F_init
F_Vdd
–
–
–
–
Output Load Sensitivity
F_load
–
–
–
Frequency vs. Temperature Slope
ΔF/ΔT
–
–
–
Dynamic Frequency Change during
Temperature Ramp
One-Year Aging
20-Year Aging
F_dynamic
–
–
–
F_1y
F_20y
–
–
Typ.
–
–
–
–
–
–
–
–
±7.10
±11.83
±28.40
±0.81
±1.35
±3.24
±15
±25
±60
±0.13
±0.21
±0.50
±1
±2
Max.
60
+70
+85
+105
±0.5
±1.0
±2.5
±1
±16.25
±32.50
±65.0
±2.75
±5.50
±11.00
±25
±50
±100
±0.21
±0.42
±0.83
–
–
Unit
MHz
°C
°C
°C
ppm
ppm
ppm
ppm
ppb
ppb
ppb
ppb
ppb
ppb
ppb/°C
ppb/°C
ppb/°C
ppb/s
ppb/s
ppb/s
ppm
ppm
Initial frequency at 25°C at 48 hours after 2 reflows
[i=s]This post was last edited by yangjiaxu on 2021-1-11 22:02[/i]After two weeks of use, CH579 has become familiar with the basic development mode, IO initialization, some special pin configuration, ...
I believe that all engineers can complete the soldering of circuit boards accurately and quickly according to the circuit diagram. However, in many practical situations, the problems facing engineers ...
Principles of Operating Systems by Chen Xiangqun from Peking University : https://training.eeworld.com.cn/course/50361. Master the basic concepts, functional components, system structure and operating...
I almost got stuck at the first level...
After receiving the Anxinke NB-IOT module, I read the various documents and felt that this module is actually very simple. From the schematic diagram, it mainl...
Live broadcast time: September 22 (Thursday) 10:00-11:30 a.m.Live broadcast topic: Renesas Electronics R-Car Advanced Driver Assistance System SolutionPresentation document: Click here to downloadWatc...
The CC2531EMK kit provides a CC2531 USB dongle and documentation to support 802.15.4 / ZigBee applications connected to a PC. The dongle can be plugged directly into your PC and can be used as an IEEE...
Now many of my friends are working in industrial control, and a lot of controls are done with PLC. The current industrial environment has many problems. For example, the factory is not big and is f...[Details]
Technology required for cleaning robots
As intelligent cleaning machines that appear in public commercial places with unknown and changeable environments such as large shopping mal...[Details]
1. This design uses STC89C51/52 (compatible with AT89S51/52, AT89C51/52, optional) microcontroller as the main controller 2. Use Hall sensor to measure motor speed non-contact 3. LCD1602 liquid cryst...[Details]
By comparing the sine signal wave with the triangle wave and performing SPWM control on V1~V4 in Figure 6-28b, an SPWM wave uAB can be generated at the AC input terminal AB of the bridge.
...[Details]
1. Prepare Keil C51 + Nuvoton N79E8X software package
1.
Click "FTP Download Address 1" under "::Download Address::" on http://www.mcu123.com/news/Soft/embsof/uc/201109/539.html. On the pop-up web ...[Details]
1. Use a signal generator, connect its output end to the AXTAL1 pin of the microcontroller, and the ground end to the ground of the microcontroller. The generator outputs a square wave of several m...[Details]
1 Introduction
Among many integrated visual development environments, VisualC++ is the best choice for programming environment. There are two main modes for the development of VC++ applications...[Details]
Keysight Technologies Advanced Low Frequency Noise Analyzer A-LFNA can help you easily measure the low frequency noise of semiconductor devices. The E4727B low frequency noise analyzer system consist...[Details]
1.
Introduction
to
thyristors
...
2. Structure and
packaging of thyristors There are two types of packaging: bolt type and flat type
Lead out...[Details]
On July 1, Melexis, a global microelectronics engineering company, announced today the launch of the MLX90381 micro angle encoder chip that meets the AEC-Q100/ISO 26262 standard, helping to i...[Details]
Industrial liquids usually require liquid density testing to control quality. The best tester in the industry is BOSHI's liquid density tester. Below, we will share with you the density test of indus...[Details]
1 Introduction
As an IC card
billing system
, this design uses one of the new 08 series microcontrollers from Motorola Semiconductor - 68HC908GP32.
2 System...[Details]
Battery industry
With the development of industrial technology, energy issues have become more and more the focus of social attention. The depletion of non-renewable energy and the environmental p...[Details]
The word "resonance" has intrigued me since before I could define it. "Resonance" has many different meanings, most of which are related in some way. As an electronics engineer, my first thought when...[Details]
Crank press and servo press are two common metal processing equipment, which are widely used in metal forming, stamping, stretching, etc. Although they have similarities in some aspects, there are ...[Details]
Domestic Chip Exchange
京公网安备 11010802033920号
EEWORLD
