Parallel - Fundamental Quartz Crystal, 12MHz Nom, SMD, 4 PIN
ABM82-12.000MHZ-18-N3X Parametric
Parameter Name
Attribute value
Is it Rohs certified?
conform to
Objectid
145206870733
package instruction
SMD, 4 PIN
Reach Compliance Code
unknown
Country Of Origin
Mainland China
YTEOL
7.23
Ageing
2 PPM/FIRST YEAR
Crystal/Resonator Type
PARALLEL - FUNDAMENTAL
Drive level
10 µW
frequency stability
0.002%
frequency tolerance
25 ppm
JESD-609 code
e4
load capacitance
18 pF
Installation features
SURFACE MOUNT
Nominal operating frequency
12 MHz
Maximum operating temperature
85 °C
Minimum operating temperature
-30 °C
physical size
3.2mm X 2.5mm X 0.6mm
Series resistance
120 Ω
surface mount
YES
Terminal surface
Nickel/Gold (Ni/Au)
ABM82-12.000MHZ-18-N3X Preview
CERAMIC SMD CRYSTAL
ABM8
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture
Sensitive - MSL = N/A: Not Applicable
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
FEATURES:
• Seam sealed package assures high reliability
• Tight tolerance and stability available
• Suitable for RoHS reflow
APPLICATIONS:
• High density applications
• Modems, communication and test equipment
• PMCIA, Wireless applications
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Operation Mode
Operating Temperature
Storage Temperature
Frequency Tolerance @+25°C
Frequency Stability over the Operating
Temperature ( ref. to +25°C)
Equivalent series resistance (R1)
Shunt capacitance (C0)
Load capacitance (CL)
Drive Level
Aging
Insulation Resistance
TABLE 1- Standard ESR
Frequency (MHz)
10.000 -11.999 (Fund)
12.000 -15.999 (Fund)
16.000 -19.999 (Fund)
20.000 - 29.999 (Fund)
-2
500
ESR( )
max
200
120
70
50
Minimum
10.000
Typical
Maximum
125.000*
Units
MHz
Notes
Contact Abracon for
available F<10MHz
10MHz - 54MHz
64MHz - 125MHz
Please contact Abracon for
available frequencies
Fundamental
3rd Overtone
(Standard Frequencies: 64, 66, 66.6666, 75,
80, 98.304, 100, 125MHz)
-10
+60
-55
+125
-50
+50
-50
See table 1 below
3.0
18.0
10
100
+2
+50
ºC
ºC
ppm
ppm
pF
pF
µW
ppm
M
(see options if other than STD)
Standard
Standard
Standard
(see options if other than STD)
(see options if other than STD)
Standard
(See options if
other than STD)
@25°C±3°C
First year
@ 100Vdc ± 15V
ESR( )
max
40
35
120
80
Frequency (MHz)
30.000 - 39.999 (Fund)
40.000 - 54.000 (Fund)
64.000 - 80.000 (3rd OT)
98.304 - 125.000 (3rd OT)
OPTIONS AND PART IDENTIFICATION: (Left blank if standard)
ABM8
Height (mm)
Blank: 0.80 max
1: 0.65±0.05
2: 0.60±0.10
Frequency in MHz
Please specify the
frequency in MHz.
e.g. 16.000MHz
Load Capacitance (pF)
Please specify CL (min
6pF) in pF or S for series
Custom ESR if
other than standard
R
: Specify a value in
(e.g.: R40)
Operating Temp.
E
Blank: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
J**: -40°C ~ +105°C
K**: -40°C ~ +125°C
** Frequency stability ±
50ppm and ± 100 ppm
-
MHz -
-
-
-
Packaging
Blank: Bulk
T: 1kpcs / reel
T2: 250pcs / reel
T3: 3kpcs / reel
Freq. Stability
Blank: ± 50 ppm
U: ± 10 ppm(*)
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Q: ± 100 ppm
(*) Option E, B, and
-10°C to +60°C only.
Freq. Tolerance
Blank: ± 50 ppm
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 07-1-20
ISO9001-2015
CERTIFIED
CERAMIC SMD CRYSTAL
ABM8
OUTLINE DRAWING:
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
Note:
Due to material availability, the chamfer could be located
on pin #1, 3, or 4. Be advised that the chamfer location has
no impact on the electrical performance of the device.
Table 2
Height (mm)
ABM8
0.80 max
ABM81
0.65+/-0.05
ABM82
0.60+/-0.10
Dimensions: mm
TAPE & REEL:
Option "-T"
: Tape and reel (1,000pcs/reel) : ABM8, ABM82
Tape and reel (3,000pcs/reel) : ABM81
Option "-T2" : Tape and reel (250pcspcs/reel) : ABM8
Option "-T3" : Tape and reel (3,000pcs/reel) : ABM8, ABM82 only
REFLOW PROFILE:
Zone
1
2
3
Dimensions: mm
Description
Temperature
Time
Preheat
Reflow
Peak heat
T
SMIN
~ T
SMAX
150°C ~ 180°C
T
L
230°C
T
P
260°C
±
5°C
60 ~ 120 sec.
30 ~ 40 sec.
10 sec. MAX
ATTENTION:
Abracon LLC’s products are COTS – Commercial-O -The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
The eye diagram is a series of digital signals accumulated and displayed on an oscilloscope. It contains a wealth of information. The influence of inter-symbol crosstalk and noise can be observed from...
This content is originally created by EEWORLD forum user hpq916 . If you want to reprint or use it for commercial purposes, you must obtain the author's consent and indicate the source....
Repairing an imported ventilator, the pressure detection and rate output amplifier circuits are like this. There are three types of operational amplifiers: two of which are not commonly used, LT1079 a...
/******************************************************************************** Function name: ADC_Init(uint16_t ch,ADC_VREF Vref,ADC_Resolution nBit)* Function description: ADC initializes one or m...
Please advise, how to choose the appropriate capacitor withstand voltage value based on EMC test such as CI, ESD, etc.?Previously, I thought the highest test voltage was 34V, so I chose 50V withstand ...
2020 is the year when automotive information security standards are fully rolled out. The successive promulgation of international standards and regulations means that vehicle information security h...[Details]
introduce This application document describes the Atmel? ATMEL MCU, CPLD download line interface; the interface for online programming of AT89SX microcontroller using AT89SISP programmer. AT89ISP s...[Details]
Is new infrastructure really the next trend? In the early days of this new concept, perhaps only data can best illustrate the problem. While most people are still maintaining a cautious...[Details]
Power amplifier, referred to as "power amplifier". In many cases, the rated output power of the host is not enough to drive the entire audio system. At this time, a power amplifier must be installe...[Details]
Light Oscilloscope - Structure and Principle Light Oscilloscope Principle Diagram Light oscilloscope is mainly composed of vibrator, optical system, paper conveyor and time scale. The vibrator i...[Details]
Since August 1, 2003, China's electronic product quality compulsory certification system (3C certification) has been in place for nearly three years. The state has taken corresponding compulsory measu...[Details]
SANTA CLARA, Calif., May 26, 2022 – Applied Materials, Inc. has announced a new system that improves the transistor wiring deposition process, significantly reducing resistance and breaking through...[Details]
On May 7, a consortium of several Japanese telecommunications companies recently issued a press release announcing the launch of an industry-leading 6G prototype device with a data transmission spe...[Details]
China Energy Storage Network:
China Mobile announced in various public occasions in early July that it will build more than 50,000 5G base stations this year, realize 5G commercial services i...[Details]
At the SAIC Group's shareholders' meeting, an investor asked whether SAIC would consider cooperating with third-party companies such as Huawei in autonomous driving. In response, SAIC Chairman Chen H...[Details]
In an electric bicycle, the inverter of the brushless DC motor consists of six power VDMOS tubes and six freewheeling diodes. The six freewheeling diodes are parasitic in these six VDMOS tubes...[Details]
The project requires the use of the STM8L051F3 chip to implement the function of ADC collecting voltage to obtain power. I have never been exposed to STM8 before, so I will record this process here. ...[Details]
On December 15, the Shanghai Stock Exchange Science and Technology Innovation Board Listing Review Center issued a decision to terminate the review of the initial public offering and listing of Jiang...[Details]
1. Design Process
Preface
Early technologies such as GPIB and VXI were designed based on dedicated instrument interface standards, so everything from the underlying connectors, interface cards, c...[Details]
Automotive relays are an important electronic component, commonly used for switch control in automotive circuits, such as lights, horns, electric windows, etc. This article will introduce the princ...[Details]
Test/Measurement
京公网安备 11010802033920号
EEWORLD
