(5 ±1 seconds and charge/discharge not exceeding 50 mA)
0.1%
1,000 megohm microfarads or 100 GΩ
(Rated voltage applied for 120 ±5 seconds @ 25°C)
Parameters/Characteristics
To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.
Capacitance and dissipation factor (DF) measured under the following conditions:
1 MHz ±100 kHz and 1.0 Vrms ±0.2 V if capacitance ≤ 1,000 pF
1 kHz ±50 Hz and 1.0 Vrms ±0.2 V if capacitance > 1,000 pF
Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known as
Automatic Level Control (ALC). The ALC feature should be switched to "ON."
Post Environmental Limits
High Temperature Life, Biased Humidity, Moisture Resistance
KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within
the same form factor (configuration and dimensions).
These products are protected under US Patents 7,172,985 & 7,670,981, other patents pending, and any foreign counterparts.
KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within
the same form factor (configuration and dimensions).
These products are protected under US Patents 7,172,985 & 7,670,981, other patents pending, and any foreign counterparts.
RAM (Random Access Memory) Random Access Memory. The contents of a storage unit can be taken out or stored at will as needed, and the access speed is independent of the location of the storage unit. T...
The directional movement of electric charge is called current. Current is usually represented by I in a circuit. There are two types of current: direct current and alternating current. The magnitude a...
[align=center][/align] [font=微软雅黑][size=5]What languages have you used to develop hardware? I am not very knowledgeable, and I have only used C and assembly. [/size][/font] [font=微软雅黑][size=5]Now it s...
[size=4] The features of the ADC12 module in the msp430 microcontroller are as follows: 12-bit conversion accuracy, 1-bit nonlinear error, 1-bit nonlinear integral error; multiple clock sources for th...
Recently, ARM's open source project DAPLink has been updated a lot. The most important change is that it officially supports STM32F103 as a controller, which means that the ST-Link of the Nucleo devel...
According to Yonhap News Agency, on the afternoon of January 18th local time, the Seoul High Court of South Korea pronounced the verdict on the second-instance retrial of Lee Jae-yong's "cronyism" ca...[Details]
On September 3, 2024, when GMCC's cumulative production and sales of air-conditioning compressors reached 1 billion units and won the Guinness World Records title (record for cumulative sales ...[Details]
As shown in the figure below, STM32F103F103 is directly connected to the four-wire resistive touch screen through its own I/O port to realize the touch screen controller function. Among them, PA8, PA...[Details]
For the common incandescent bulbs, fluorescent bulbs, and energy-saving bulbs, even if the product itself may generate heat during operation, the high heat of the components can still be effectiv...[Details]
With the advent of the information age, handheld electronic products are emerging in an endless stream (such as PDAs, digital cameras, mobile phones, etc.). These products are mainly powered by bat...[Details]
On the afternoon of December 9th, local time in Germany, Honeycomb Energy Europe officially signed a long-term lease agreement with the factory project team (PBH) for its Heusweiler module PACK fac...[Details]
1 Introduction Nowadays, most MCUs are powered by 3.3V, but some peripheral devices are still powered by 5V. Communication between the two inevitably requires conversion between levels. 2. Circuit ...[Details]
On May 27, 2020, the Hague Court of the Netherlands made a trial decision: it ruled that the patent EP1129536B1 (hereinafter referred to as the patent or EP536) used by Sisvel in the Netherlands to s...[Details]
SA4828 Block Diagram
Figure SA4828 block diagram
The principle block diagram of SA4828 is shown in Figure 3. The main working principle is similar to that of SA8282, which can be found in re...[Details]
As LED performance continues to improve and costs continue to decline, its application areas in automotive interior and exterior lighting are becoming wider and wider. Different applications have diff...[Details]
Recently, Baolong Technology released a new generation of high-performance AK2 ultrasonic radar sensor. The AK2 ultrasonic radar developed by Baolong Technology adopts a self-designed core with the...[Details]
Introduction: German battery system manufacturer Akasol showcased its third-generation battery system. The new AKASystem 9 AKM 150 CYC is said to have a particularly high energy density and is suitab...[Details]
Yesterday I used uboot1.4 to debug an LED light experiment based on s3c44b0, and it was successful. Here is a record:
The initial idea was to use uboot's loadb command to debug my own ported uboo...[Details]
The data center uses the channel between the transmitting system and the receiving system to accurately and effectively transmit valuable information. If the channel performs poorly, it can cause sig...[Details]
In digital circuit experiments, several instruments and meters are needed to observe experimental phenomena and results. Commonly used electronic measuring instruments include multimeters, logic pens...[Details]