-
When people talk about UPS selection, they usually talk about UPS capacity selection first, that is, users can choose the required UPS output power (KVA value) according to the load statistics of the...[Details]
-
China Energy Storage Network
: In recent years, distributed energy has grown rapidly, and related technologies have flourished, greatly facilitating consumers to establish connections with th...[Details]
-
According to a new research report released by Strategy Analytics, Apple Watch outsold the entire Swiss watch industry in 2019. Apple Watch shipped 30.7 million units worldwide in 2019, while the tot...[Details]
-
/****************************************************** *************
CCR0 capture/compare register--compare function interrupt timing
Brief description: This program compares the value of the CCR0...[Details]
-
//--------------------------------- //x5045 subroutine //--------------------------------- void RESWDI(void) //Reset watchdog (feed dog) { CS = 0; CS = 1; } void WREN(void) //Write enable latch { SC...[Details]
-
80+TM and Climate Savers Computing™ have set a strong efficiency standard for computer power supplies. The “Platinum” level of these standards states that computer power supplies must be 90% efficient...[Details]
-
Universal Asynchronous Receiver/Transmitter UART UART (Universal Asynchronous Receiver/Transmitter) is used for asynchronous communication and can achieve full-duplex transmission and reception. Th...[Details]
-
Useful Information Sharing | How to use an oscilloscope, AFG and multimeter to test the dimming linearity of an LED driver?
With the development of LED lamp technology, digital dimmi...[Details]
-
/****************************************************************************************** Experimental phenomenon: After downloading the program, the "dynamic digital tube module" displays 1-8 from...[Details]
-
In recent days, I have taken some time to study the internal Flash operation of STM32. Generally speaking, it is relatively simple. It should be noted that you should first understand the internal ad...[Details]
-
Frequency measurement principle: frequency is measured by counting method. Implementation method: Using the feature of 51 MCU timer as external pulse counter, frequency counting can be realized. Spec...[Details]
-
An ammeter, also called an ammeter, is used to measure the current in a circuit. The ammeter has three terminals and two ranges; the two ranges share a "+" or "-" terminal, marked "0.6" and "3" is a ...[Details]
-
The 2020 CES (Consumer Electronics Show) closed on January 10. The Consumer Electronics Show not only exhibited a large number of proof-of-concepts and prototype designs, but was also a good place to...[Details]
-
The figure shows the flowchart of the vertical amplitude division adjustment function block. Similarly, in the process of program function processing, the amplitude division value selected by the va...[Details]
-
1. Introduction
The wave of new energy vehicles is getting bigger and bigger, and the body intelligence is becoming more and more perfect, and intelligent driving is closely related to sensors...[Details]