Parallel - Fundamental Quartz Crystal, 11.999MHz Nom, SMD, 4 PIN
ABM8-11.999MHZ-18-C7H Parametric
Parameter Name
Attribute value
Is it Rohs certified?
conform to
Objectid
145206894261
package instruction
SMD, 4 PIN
Reach Compliance Code
unknown
Country Of Origin
Mainland China
YTEOL
7.23
Ageing
2 PPM/FIRST YEAR
Crystal/Resonator Type
PARALLEL - FUNDAMENTAL
Drive level
10 µW
frequency stability
0.0035%
frequency tolerance
15 ppm
JESD-609 code
e4
load capacitance
18 pF
Installation features
SURFACE MOUNT
Nominal operating frequency
11.999 MHz
Maximum operating temperature
70 °C
Minimum operating temperature
-30 °C
physical size
3.2mm X 2.5mm X 0.8mm
Series resistance
200 Ω
surface mount
YES
Terminal surface
Nickel/Gold (Ni/Au)
ABM8-11.999MHZ-18-C7H Preview
CERAMIC SMD CRYSTAL
ABM8
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture
Sensitive - MSL = N/A: Not Applicable
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
FEATURES:
• Seam sealed package assures high reliability
• Tight tolerance and stability available
• Suitable for RoHS reflow
APPLICATIONS:
• High density applications
• Modems, communication and test equipment
• PMCIA, Wireless applications
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Operation Mode
Operating Temperature
Storage Temperature
Frequency Tolerance @+25°C
Frequency Stability over the Operating
Temperature ( ref. to +25°C)
Equivalent series resistance (R1)
Shunt capacitance (C0)
Load capacitance (CL)
Drive Level
Aging
Insulation Resistance
TABLE 1- Standard ESR
Frequency (MHz)
10.000 -11.999 (Fund)
12.000 -15.999 (Fund)
16.000 -19.999 (Fund)
20.000 - 29.999 (Fund)
-2
500
ESR( )
max
200
120
70
50
Minimum
10.000
Typical
Maximum
125.000*
Units
MHz
Notes
Contact Abracon for
available F<10MHz
10MHz - 54MHz
64MHz - 125MHz
Please contact Abracon for
available frequencies
Fundamental
3rd Overtone
(Standard Frequencies: 64, 66, 66.6666, 75,
80, 98.304, 100, 125MHz)
-10
+60
-55
+125
-50
+50
-50
See table 1 below
3.0
18.0
10
100
+2
+50
ºC
ºC
ppm
ppm
pF
pF
µW
ppm
M
(see options if other than STD)
Standard
Standard
Standard
(see options if other than STD)
(see options if other than STD)
Standard
(See options if
other than STD)
@25°C±3°C
First year
@ 100Vdc ± 15V
ESR( )
max
40
35
120
80
Frequency (MHz)
30.000 - 39.999 (Fund)
40.000 - 54.000 (Fund)
64.000 - 80.000 (3rd OT)
98.304 - 125.000 (3rd OT)
OPTIONS AND PART IDENTIFICATION: (Left blank if standard)
ABM8
Height (mm)
Blank: 0.80 max
1: 0.65±0.05
2: 0.60±0.10
Frequency in MHz
Please specify the
frequency in MHz.
e.g. 16.000MHz
Load Capacitance (pF)
Please specify CL (min
6pF) in pF or S for series
Custom ESR if
other than standard
R
: Specify a value in
(e.g.: R40)
Operating Temp.
E
Blank: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
J**: -40°C ~ +105°C
K**: -40°C ~ +125°C
** Frequency stability ±
50ppm and ± 100 ppm
-
MHz -
-
-
-
Packaging
Blank: Bulk
T: 1kpcs / reel
T2: 250pcs / reel
T3: 3kpcs / reel
Freq. Stability
Blank: ± 50 ppm
U: ± 10 ppm(*)
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Q: ± 100 ppm
(*) Option E, B, and
-10°C to +60°C only.
Freq. Tolerance
Blank: ± 50 ppm
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 07-1-20
ISO9001-2015
CERTIFIED
CERAMIC SMD CRYSTAL
ABM8
OUTLINE DRAWING:
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
Note:
Due to material availability, the chamfer could be located
on pin #1, 3, or 4. Be advised that the chamfer location has
no impact on the electrical performance of the device.
Table 2
Height (mm)
ABM8
0.80 max
ABM81
0.65+/-0.05
ABM82
0.60+/-0.10
Dimensions: mm
TAPE & REEL:
Option "-T"
: Tape and reel (1,000pcs/reel) : ABM8, ABM82
Tape and reel (3,000pcs/reel) : ABM81
Option "-T2" : Tape and reel (250pcspcs/reel) : ABM8
Option "-T3" : Tape and reel (3,000pcs/reel) : ABM8, ABM82 only
REFLOW PROFILE:
Zone
1
2
3
Dimensions: mm
Description
Temperature
Time
Preheat
Reflow
Peak heat
T
SMIN
~ T
SMAX
150°C ~ 180°C
T
L
230°C
T
P
260°C
±
5°C
60 ~ 120 sec.
30 ~ 40 sec.
10 sec. MAX
ATTENTION:
Abracon LLC’s products are COTS – Commercial-O -The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
I will record the process of implementing the USB virtual serial port on the Zhengdian Atom F429 Apollo development board, hoping to help others who want to learn USB.First, I updated the source code ...
The negative feedback amplifier circuit can be divided into voltage feedback and current feedback from the sampling method of the output end, and can be divided into series feedback and parallel feedb...
With the development of 3G technology, the processor speed is required to be higher and smaller, and the development of DSP can just meet this development requirement. Because other traditional proces...
The 2019 TI Cup National Undergraduate Electronic Design Competition has been fully launched. In order to ensure that the participating teams have enough time to familiarize themselves with and unders...
[size=4]1. Serial communication and parallel communication [/size] [size=4] DSP controllers exchange information and communicate with external devices. There are two main communication methods: 1. Ser...
I came up with a stupid idea, which is to create a BRD file, place the desired components in the file, and then open the file with DXP. However, DXP cannot display the file. Can anyone help me? Thank ...
Cyberattacks on connected medical devices are increasing and are even more serious than hacking medical systems. As Harvard Business Review (HBR) points out, "While hacking medical systems is scary, ...[Details]
Amid more than a year of global chip supply shortages, strong demand has caused the stock prices of major semiconductor manufacturers to soar for several consecutive quarters, but Truist analyst Will...[Details]
introduction
LVDS (Low Voltage Differential Signal) is a new technology that can meet the requirements of ultra-high-speed data transmission. It has the advantages of low voltage, low rad...[Details]
On April 25, the world's power battery giant CATL recently released the Shenxing PLUS battery, which is also the world's first lithium iron phosphate battery with a range of 1,000 kilometers. It al...[Details]
The purpose of this experiment: Use interrupts to control the addition and subtraction of the digital tube numbers through the keys numbered 8 and C. After adding to 15, it will cycle back to 0, and ...[Details]
Gas concentration is one of the important indicators of coal mine monitoring systems. At present, most of the gas sensor equipment used in mines adopts wired transmission methods, that is, optical cab...[Details]
Today, Huawei officially released the Mate40 series in China. The Mate40 8+128 GB is priced at 4999 yuan, and the 8+256 GB is priced at 5499 yuan. The Mate40 Pro 8+128 GB is priced at 6499 yuan, 8+25...[Details]
Tesla has confirmed in a new software update that its vehicles can now scan for rough roads, such as potholes, and avoid them by adjusting the suspension to avoid damage,media reported. Image cr...[Details]
The servo motor encoder cable is a very important part of the servo system. It is responsible for converting the motor's rotation information into electrical signals to achieve precise control of t...[Details]
In the digital world, executives of major mobile phone manufacturers not only praise themselves through popular science and promote themselves, but also like to talk about their competitors on Weibo....[Details]
Many people have misunderstandings about the memory of 51 MCU. The most common ones are the following two: ① If the number of variables exceeds 128, the compact mode must be used for compilation. T...[Details]
The passive high-impedance probe of the oscilloscope is widely used. Engineers often connect the probe to different oscilloscopes, or connect different probes to the oscilloscope. In the new system a...[Details]
On a certain day in a certain delivery room, you were born (power up), but you didn't cry. The doctor lifted you up and slapped you hard on the butt, and you burst into tears (reset, reset successf...[Details]
1 Introduction The application of single-chip microcomputer in the field of industrial control is different from that in the civil and commercial fields. The environment of industrial control is rela...[Details]
The MAX5974_ is a wide-input voltage range, active-clamp, current-mode
PWM controller
that provides forward conversion for powered devices (PDs) in Power over Ethernet (PoE). The M...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
