EEWORLDEEWORLDEEWORLD

Part Number

Search

R1172S322B-E2-AE

Description
Fixed Positive LDO Regulator
CategoryPower/power management    The power supply circuit   
ManufacturerRICOH Electronic Devices Co., Ltd.
Download Datasheet Parametric View All

R1172S322B-E2-AE Overview

Fixed Positive LDO Regulator

R1172S322B-E2-AE Parametric

Parameter NameAttribute value
Objectid8076957580
Reach Compliance Codeunknown
ECCN codeEAR99
Regulator typeFIXED POSITIVE SINGLE OUTPUT LDO REGULATOR
R1172x Series
Super Low On Resistance / Low Voltage 1 A LDO for Automotive Applications
NO. EC-122-140219
OUTLINE
The R1172x is a CMOS-based positive voltage regulator IC that is specifically designed for automotive
applications. The R1172x has features of super low dropout, 1A output current capability. Even the output voltage
is set at 1.5V, on resistance of internal FET is typically 0.32Ω. Therefore, applications that require a large current
at small dropout are suitable for the R1172x. Low input voltage is acceptable and low output voltage can be set.
The minimum input voltage is 1.4V, and the lowest set output voltage is 0.8V. Each of these ICs consists of a
voltage reference unit, an error amplifier, resistor net for setting output voltage, a current limit circuit at
over-current, a chip enable circuit, a thermal-shutdown circuit, and so on. A stand-by mode with ultra low
consumption current can be realized with the chip enable pin. The output voltage of R1172 is fixed in the IC.
Since the packages for this IC are SOT-23-5, SOT-89-5, and HSOP-6J with high power dissipation, high
density mounting of the ICs on boards is possible.
FEATURES
Input Voltage Range (Maximum Rating) .................... 1.4V to 6.0V (6.5V)
Output Current ............................................................ 1A
Supply Current ............................................................. Typ. 60μA
Standby Current .......................................................... Typ. 0.1μA
Output Voltage.............................................................. 0.8V to 5.0V (0.1V step)
(
For other voltages, refer to
SELECTION GUIDE).
Dropout Voltage............................................................ Typ. 0.32V (V
SET
=
1.5V, I
OUT
=1A)
Typ. 0.18V (V
SET
=
2.8V, I
OUT
=1A)
Ripple Rejection ........................................................... Typ. 70dB (V
SET
=
2.8V)
Output Voltage Accuracy..............................................
±2.0%
Output Voltage Temperature Coefficient ...................... Typ.
±100ppm/°C
Line Regulation ............................................................ Typ. 0.05%/V
Load Regulation ........................................................... Typ. 15mV at I
OUT
=300mA,
Typ. 50mV at I
OUT
=1A
Output Noise ................................................................ 30
μVrms
Packages .................................................................... SOT-23-5, SOT-89-5, HSOP-6J
Built-in Inrush current limit circuit ............................... Typ. 500 mA
Built-in Fold-Back Protection Circuit ........................... Typ. 250mA (Current at short mode)
Built-in Thermal Shutdown Circuit .............................. Thermal Shutdown Temperature: Typ. 150°C
Released Temperature: Typ. 120°C
Built-in Auto Discharge Function ................................ R1172xxxxD
Output capacitors ....................................................... C
IN
=C
OUT
=Tantalum
4.7μF (V
OUT
< 1.0V)
C
IN
=C
OUT
=Ceramic
4.7μF (V
OUT
≥1.0V)
T
T
T
APPLICATIONS
Power source for car accessories including car audio equipment, car navigation system, and ETC system.
1
[AT32F421 Review] +PWM adjusts fan speed
PWM can be used to adjust the brightness of lights or the speed of fans, etc. In order to verify the effect of PWM regulation, a fan driver module based on power amplification is used here. Its connec...
jinglixixi Domestic Chip Exchange
Five Design Challenges Facing Remote Patient Monitoring Systems
The wearable patient monitor market is growing rapidly. Remote patient monitors help doctors monitor patients in real time, which foresees the future of IoT in healthcare.Remote patient monitoring sys...
qwqwqw2088 Wireless Connectivity
【FAQ】ST wide bandgap high-performance silicon carbide and gallium nitride products and technologies and different application cases
Live Topic: ST's wide-bandgap high-performance silicon carbide (SiC) and gallium nitride (GaN) products and technologies and different application casesContent introduction: This live broadcast focuse...
EEWORLD社区 Industrial Control Electronics
Answer the questions to win a gift | Choose gate drivers from Infineon, and get a 50-yuan JD card
Are you confused about gate drivers? Infineon Technologies has the answer! You can also get a 50-yuan Jingdong card and 10 free development boards.Event time: From now until July 4thActivity 1: Answer...
EEWORLD社区 Industrial Control Electronics
Share a table of the electrical and thermal characteristics of the selected packaging materials
Note: Unless otherwise specified, all prime values are measured at 20°C. (α) at 100°C. (β) at 0°C. (a) || to three axes. (b) ⊥ to the three axes. (c) Average value; graphite varies from 2.0 to 5.6 dep...
qwqwqw2088 Analogue and Mixed Signal

Technical ResourceMore

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号