Specifications are limited by the circuit and resistance value.
Please contact us separately.
3 digits
●
Resistor Networks：RNX, RTX, RTY
RNX
Circuit
Code
RNX: Custom Resistor Network
RTX,RTY: SOT-23 Resistor network
●
Resistor Networks：RDA, RDB
RDA
Circuit
Code
RDA: Dual terminator network
RDB: Differential terminator network
Example
Q20
Package
Symbol
Package type symbol＋
Number of pins
Example
T
Terminal
Surface Material
T :Sn
TE
Taping
TE: Plastic
embossed
5001
Custom
Code
Q20
Package
Symbol
Same as above
(Except Q24, N14, N08)
T
Terminal
Surface Material
T:Sn
TE
Taping
TE: Plastic
embossed
471J
Nominal Resistance
& Tolerance of R1
3 digits G: ±2%
J : ±5%
511J
H
Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS.
Nominal Resistance
T.C.R.
& Tolerance of R2 （×10
−6
/K）
3 digits G: ±2%
E :±25
J : ±5%
C:±50
H:±100
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
■Ratings
Package
Package Symbol
Package Power Rating
Resistance Range
Max. Working Voltage
Rated Voltage
Rated Ambient Temp.
Operating Temp. Range
10Ω〜1kΩ
1.1kΩ〜
Q16
0.8W
QSOP
Q20
1.0W
Q24
1.0W
N08
0.4W
SOIC
N14
0.6W
N16
0.8W
SOT-23
S03
0.2W
Power Rating 200mW/Resistor Element
※1
Power Rating 50mW/Resistor Element
※1
100V
√￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣
Rated Power×Nominal Resistance Value, Rated Voltage should not exceed Max. Working Voltage.
＋70℃
−55℃〜＋125℃
※2
Above ratings are based on the thermal resistances using a multi-layer circuit board (EIA/JESD51). For mounting on a mono-layer board, power derating shall be needed. Please inquire of us about
conditions.
※1 Total power consumption of all elements should not exceed the package power rating.
※2 About operating temperature range −55℃〜＋155℃, We can provide as custom devices. Please inquire of us about it.
●Standard Resistor Networks
Circuit
Code
Circuit Schematics
（Top View）
Pin n
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
C:±50
H:±100
Resistance Range
（Ω）
E24
and Absolute Tolerance
F:±1%
G:±2%, J:±5%
100〜100k 100〜100k
51〜100k
30〜100k
n/2
51〜100k
10〜100k
Circuit
Code
Circuit Schematics
（Top View）
Pin n
R1
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
Resistance Range(Ω) (E24)
and Resistance Tolerance
G:±2%, J :±5%
Network Resistors
Pin n
RBA
R
8, 14, 16
R
20, 24
n/2
Number of Pins : n=8,16,20,24
RDA
R2
-
R1
R2
-
16, 20
C:±50
H:±100
Pin n
R1
Pin 1
Pin n
R
Pin n
Pin 1
Pin 1
n/2
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin n
Pin
:
Number of Pins
n
n=8,16,20,24
E:±25
n
100〜100k
Pin
100〜100k
R
Pin n
R1
R2
E:±25
C:±50
H:±100
RBB
R
Pin 1
n/2
Pin
8, 14, 16
20, 24
C
R
n
C:±50
R1
R
R2
R1
Pin 1
51〜100k
30〜100k
n/2
51〜100k
10〜100k
100〜40k
2R
n/2
RDB
Pin 1
R1
Pin 1
n/2
16, 20
R2
R1
Pin
Number
1
Pins
R
2
1
n/2
: n=8,16,20,24
R
of
H:±100
E:±25
C:±50
Pin 1
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin 1
Number of Pins : n=3,SOT-23 Only
Pin 1
100〜40k
Pin n
R
R
Pin n
RTX
n/2
Pin n
R
1
R
2
R
2R
2R
R
R
2
3
SOT-23
Only
2R
2R
Number of Pins : n=8,16,20,24
RLA
R
2R
2R
R
2R
2R
n/2
14, 16
H:±100
1k〜30k
H:±100
2R
51〜40k
2R
51〜40k
2R
Pin 1
Pin 1
n/2
ber of Pins : n=8,16,20
Number of Pins : n=3,SOT-23 Only
Pin 1
n/2
■Performance
Test Items
Resistance
T.C.R.
Resistance to soldering heat
Rapid change of temperature
Moisture resistance
Endurance at 70℃
High temperature exposure
Performance Requirements
ΔR±
（％＋0.05Ω）
Limit
Typical
25℃
＋25℃/−55℃, ＋25℃/125℃
260℃±5℃, 10s±1s
−55℃
（30min.）
/＋125℃
（30min.）, 100 cycles
40℃±2℃, 90〜95%RH, 1000h
1.5h ON/0.5 h OFF cycle
70℃±2℃, 1000 h
1.5 h ON/0.5 h OFF cycle
＋125℃, 1000 h
Within specified tolerance
Within specified T.C.R.
0.1
※3
0.5
※3
Test Methods
0.05
0.05
0.05
0.05
0.10
0.5
※3
0.25
※3
0.25
※3
※3 Guaranteed value differs depending on resistance value.
■Precautions for Use
・
he resistor of this product is formed by narrow patterning a thin metal film. Thus, application of excessive voltage causes burn and destruction of the resistive
T
film, abnormality in resistance or open resistance and loss of proper function. The properly and electrostatically measured taping materials are used for the
components, but attention should be paid to the fact that there is some danger the parts may be destructed by static electricity(equivalent to 500V and more at
100pF, 1.5kΩ) to cause a change in resistance in the conditions of an excessive dryness when mounting on the boards. Similarly, care should be given not to apply
the excessive static electricity at the time of mounting on the boards. When designing, consideration can be taken into withstanding ESD for customized KPC
products. Please consult with us about the details.
・Hand
soldering by iron soldering or repairment are not recommended because KPC is a multi-pin product.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
NETWORKS
EU
RoHS
KPC RIA
KPC RNX
Isolated Resistor Networks
Custom Resistor Networks
■Applications
・
utomotives, medical instrument, industrial machines, Measurement equipment
A
・
omputers and networks
C
・
igh precision OP amp circuit, High precision voltage divider
H
■Features
・
High precision resistor networks
Combination of different resistance is available for custom circuit.
The navigation industry has been booming around the world due to factors such as the acceleration of urban construction, the increase in car ownership, the expansion of roads, and the increasing compl...
MPU (Memory Protection Unit) is an optional module in the Cortex-M core. Microcontrollers with MPU allow the memory map (including Flash, RAM and peripherals) to be subdivided into several areas, each...
Let’s talk about a simple motor driver chip introduced in the brushless DC motor . Let’s take a look at it below.PAC5xxx Family of Devices: Single Package, Small Footprint SolutionQorvo 's solution is...
For DSPs with MPSD emulation ports (TMS320C30/C31/C32), you cannot use one emulator to debug at the same time. You can only debug one DSP at a time. For DSPs with JTAG emulation ports, you can connect...
Power amplifiers are usually optimized for ACPR and efficiency at maximum output power, but cellular phones operate in the medium/low power range in most cases, during which the efficiency of the powe...
With the upgrading of consumer demand, consumers have increasingly demanded more functions of washing machines, drying function being one of them. Washer-dryers are gradually becoming the mainstream t...
Australian electric vehicle fast-charging technology company Tritium has unveiled what it calls the world’s most powerful electric vehicle charger at Automotive World Japan. Called the Veefil-PK DC H...[Details]
Application of Incremental Simulation Technology in IP Verification
Verification involves an iterative cycle at each stage: simulate, check the results, change the stimulus or design or de...[Details]
IU5925T is a charge management IC
that supports 1-2 supercapacitors
. IU5925T integrates power MOS and adopts synchronous switch architecture, which requires only a few peripheral devi...[Details]
Infineon launches new automotive 60V and 120V OptiMOS 5 in TOLx package for high-power ECUs with 24V-72V supply
The electrification of transportation systems is accelerating. In add...[Details]
I am working on a porting of the Android for Linux kernel to S3C2440. Most of the ports I have seen online are for S3C2410. Even if there are ports for S3C2440, they do not explain everything i...[Details]
Early this morning, Apple officially released the fourth test version Beta 4 of iOS15.5 to developers. According to Apple’s frequency of “one update per week”, it is highly likely that the official v...[Details]
Although OOK modulation has poor performance, its circuit is simple, easy to implement, and stable in operation, so it has been widely used. Such circuits are almost always used in car and motorc...[Details]
Immersive experiences that were once exclusive to high-end devices, such as AR, high-fidelity games, and new mobile and home use cases based on AI, are now becoming mainstream market demands. Enablin...[Details]
The top ten filtering methods commonly used in microcontroller ADCs, you no longer have to worry about data processing! 1. Limiting filtering 1. Method Determine the maximum allowable deviation v...[Details]
Not long ago, Xilinx launched the industry's largest programmable logic device, the Virtex-7 2000T FPGA , and began to supply it to customers. The Virtex-7 2000T has 6.8 billion transistors and ...[Details]
On June 11, the results of the second review meeting of the Science and Technology Innovation Board Listing Committee were released. Fujian Fuguan Co., Ltd., Yantai Ruichuang Micro-Nano Technology Co...[Details]
Finally, I don't have to look for charging piles everywhere. It's really convenient to drive to my doorstep to charge my car. In recent days, more and more new energy car owners around me have said go...[Details]
Whether it is now or in the future, two-channel stereo will still be the main way of home high-fidelity playback and will always be widely adopted by audiophiles. It will not die out due to the emerg...[Details]
1. Definition of IQE, LEE and EQE First, the definitions and expressions of the internal quantum efficiency (IQE: Internal Quantum Efficiency), light extraction efficiency (LEE: Light Extracti...[Details]
The rapid growth of the electric vehicle (EV) market—expected to grow at a CAGR of up to 25% over the next decade1—is driven by environmental concerns and government support, and enabled by silicon...[Details]
Automotive Electronics
京公网安备 11010802033920号
EEWORLD
