DIP and D Subminiature Jumpers
Features:
• Aries offers a wide array of DIP/D Subminiature jumper configura-
tions and wiring possibilities for all your programming needs.
• Reliable, electronically tested solder connections.
• Cable is potted to provide strain relief.
• Protective covers are also provided on headers.
• 10-color cable allows for easy identification and tracing.
• 9 pin “D” connector available with 8 or 14 pin header.
• 15 pin “D” connector available with 14 or 16 pin header.
• 25 pin “D” connector available with 24 pin header.
• 37 pin “D” connector available with 40 pin header.
• 50 pin “D” connector available with two 24 pin headers.
• Consult factory for jumper lengths under 2.000 [50.80].
HEADER Specifications:
• Header body is red UL 94-HB Glass-filled Nylon. Consult factory
for UL 94V-0 rated material.
• Header pins are Brass, 1/2 hard.
• Header pin plating is 10µ [.25µm] min. Gold per MIL-G-45204 over
50µ [1.27µm] min. Nickel per QQ-N-290.
D-SUBMINIATURE CONNECTOR SPECIFICATIONS:
• Insulator is UL 94V-0 flame-retardant thermoplastic.
• Contacts are Copper Alloy.
• Contact plating is 100µ [2.54µm] min. Gold over Nickel.
CABLE SPECIFICATIONS:
• Insulation is UL Style 2697 Polyvinyl Chloride (PVC).
• Laminate is clear PVC, self-extinguishing.
• Conductors are 28 AWG, 7/36 strand, Tinned Copper per
ASTM B 33.
• Current rating=1 Amp @ 10°C [50°F] above ambient.
• Voltage rating=300 Volts.
• Temperature rating=176°F [80°C].
• Capacitance=13.0 pf/ft. [42.7pf/meter] nominal @1 MHz.
• Crosstalk: 10’ sample, 5 ns rise time with 2 lines driven.
Near end=4.7%; Far end=4.3% nominal.
• Propagation delay=1.5 ns/ft. [4.9 ns/meter] nominal.
• Insulation resistance=1010 Ohms (10 ft. [3 meters] min.).
Mounting Considerations:
•Suggested PCB hole size=.033 ± .002 [.86 ± .05].
Note: Aries specializes in custom design and production. In addition to
the standard products shown on this page, special materials, platings,
sizes, and configurations can be furnished, depending on quantities.
Aries reserves the right to change product specifications without notice.
ORDERING INFORMATION
XXX-XXX-XXX
No. of contacts
(“D” connector)
M=male “D”
connector
F=female “D”
connector
Termination style
(A, B, C, D, E, or M,
F for male or female
“D” connector)
No. of termination
contacts
Cable length in inches:
“D” to DIP=2” [50.80mm] min/.Ex: 2” = -002-/ 2.5”= -002.5-
“D” to “D”=3” [76.20mm] min/.Ex: 3” = -002-/ 3.5”= -003.5-
HEADER
DETAIL
“C”
A
LL DIMENSIONS
:
INCHES
[
MILLIMETERS
]
All tolerances ± .005 [.13]
unless otherwise specified
“L” ± .125
Numbers
shown pin side
for reference
only.
“B”=(NO. OF PINS PER ROW - 1) X .100 [2.54]
“C”=.390 8-16 PIN DIP; .690 24-48 PIN DIP
“D”= .300 8-16 PIN DIP; .600 24-48 PIN DIP
“D”
±.003
“
A”=(NO. OF PINS PER ROW X .100 [2.54]) + .095 [2.41]
STYLE A
“L” ± .125
See Data Sheet
11017 for other
configurations
and additional
information.
STYLE B
CABLE DETAIL
“W”=(NO. OF CONDUCTORS X .050 [1.27]) + .005 [.08]
“Y”=(NO. OF CONDUCTORS - 1) X .050 [1.27]
http://www.arieselec.com • info@arieselec.com
NORTH AMERICA
Frenchtown, NJ USA
TEL: (908) 996-6841
FAX:(908) 996-3891
ABCDEFG
EUROPE
TEL: +44 870 240 0249
FAX: +44 871 919 6033
europe@arieselec.com
11016
REV.E
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
Talking
京公网安备 11010802033920号
EEWORLD
