CC4
Vishay Electro-Films
Thin Film 0510 Size Resistor on Alumina
CHIP
RESISTORS
FEATURES
•
Wire bondable
•
Chip size: 0.050 x 0.100 inches
Product may not
be to scale
•
Resistance range: 50
Ω
to 400 kΩ
•
Alumina substrate
•
Low stray capacitance: < 0.2 pF
•
Resistor material: Nichrome
•
Resistor passivation coat optional
•
Tolerances to 0.05 %
•
Solder pad optional
The CC4 series single-value resistor chips offer increased
power in larger size, low shunt capacitance and solder pad
option. The CC4s nichrome resistor material offers excellent
stability.
The CC4s are manufactured using Vishay Electro-Films
(EFI) sophisticated thin film equipment and manufacturing
technology. The CC4s are 100 % electrically tested and
visually inspected to MIL-STD-883.
APPLICATIONS
Vishay EFI CC4 chip resistors provide excellent high-frequency response and are ideally suited for prototyping.
Typical application areas are:
•
Amplifiers
•
Couplers
•
Oscillators
•
Filters
•
Attenuators
Recommended for hermetic environments where die is not exposed to moisture.
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES AND TOLERANCES
Tightest Standard Tolerance Available
0.1 %
0.05 %
± 10 ppm/°C
± 25 ppm/°C
± 50 ppm/°C
± 100 ppm/°C
50
Ω
150
Ω
200 kΩ
400 kΩ
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Noise, MIL-STD-202, Method 308
Moisture Resistance, MIL-STD-202
Method 106 - Hermetic Applications
Stability, 1000 h, + 125 °C, 175 mW
Operating Temperature Range
Thermal Shock, MIL-STD-202,
Method 107, Test Condition F
High Temperature Exposure, + 150 °C, 100 h
Dielectric Voltage Breakdown
Insulation Resistance
Operating Voltage
DC Power Rating at + 125 °C (Derated to Zero at + 150 °C)
5 x Rated Power Short-Time Overload, + 25 °C, 5 s
- 20 dB typ.
± 0.2 % max.
ΔR/R
± 0.1 % max.
ΔR/R
- 55 °C to + 125 °C
± 0.25 % max.
ΔR/R
± 0.1 % max.
ΔR/R
400 V
10
12
min.
100 V max.
175 mW max.
± 0.25 % max.
ΔR/R
www.vishay.com
28
For technical questions, contact: efi@vishay.com
Document Number: 61004
Revision: 07-Mar-08
CC4
Thin Film 0510 Size Resistor on Alumina
Vishay Electro-Films
DIMENSIONS
in inches
0.050
SCHEMATIC
CHIP
RESISTORS
0.100
0.065
0.045
0.015
MECHANICAL SPECIFICATIONS
in inches
PARAMETER
Chip Size
Chip Thickness
Chip Substrate Material
Resistor Material
Bonding Pad Size
Number of Pads
Pad Material
Backing
Options:
Terminations: Aluminum, nickel solder (62/32)
Gold back for solder die attach
Contact Applications Engineer
0.050 x 0.100 ± 0.003 (1.27 x 2.54 ± 0.076 mm)
0.010 ± 0.002 (0.254 ± 0.05 mm)
99.6 % alumina, 2 - 4 microinch finish
Nichrome
0.015 x 0.045 (0.381 x 1.143 mm) minimum
2
25 kÅ minimum gold standard
None
ORDERING INFORMATION
Example: 100 % visual, 80
Ω,
± 10 %, ± 50 ppm/°C TCR, gold terminations
W
INSPECTION
/PACKAGING
W = 100 % visually inspected
parts in matrix tray per
MIL-STD-883
X = Sample, commercial
visually inspected parts
loaded in matrix trays (4 % AQL)
CC4
PRODUCT
FAMILY
8000
RESISTANCE
VALUE
Use first 4
significant digits
of resistance
B
MULTIPLIER
CODE
B
= 0.01
A
= 0.1
0
=1
1
= 10
2
= 100
K
TOLERANCE
CODE
A
= 0.05 %*
B
= 0.1 %*
C
= 0.25 %*
D
= 0.5 %
F
= 1.0 %
G
= 2.0 %
J
= 5.0 %
K
= 10 %
*Coating standard
D
TCR
A
= ± 10 ppm/°C
B
= ± 25 ppm/°C
D
= ± 50 ppm/°C
E
= ± 100 ppm/°C
G
TERMINATIONS
G
= Gold
S
= Solder
Document Number: 61004
Revision: 07-Mar-08
For technical questions, contact: efi@vishay.com
www.vishay.com
29
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
51mcu
京公网安备 11010802033920号
EEWORLD
