FG*: Straight plug, cable collet and nut for fitting a bend relief
1 key (alpha=0, plug: male contacts, receptacle: female contacts)
Brass (chrome plated) shell and collet nut, nickel plated brass latch sleeve and mid pieces
D52: 4.3 - 5.2 mm
Z : Nut for fitting a bend relief
29.81 g
Performance
Configuration
Insulator
Rated Current
2B.312 : 12 Low Voltage
L: PEEK (UL 94 / V-0/3.2, depends on material thickness)
7 Amps
Specifications
Contact Type: Solder
Max. Matings: 5000
LEMO products and services are provided “as is”. LEMO makes no warranties or representations with regard to LEMO product & services or use of
them, express, implied or statutory, including for accuracy, completeness, or security. The user is fully responsible for his products and applications
using LEMO components.
1/3
Contact Dia.: 0.7 mm (0.028in)
Bucket Dia.: 0.8 mm (0.031in)
Max. Stranded Conductor: 0.34 mm^2 (AWG 22)
Max. Conductor: 0.34 mm^2 (AWG 22)
R (max): 6.1 mOhm
Vtest (contact-shell): 1350 V (AC), 1910 V (DC)
Vtest (contact-contact): 1250 V (AC), 1770 V (DC)
Others
Temp (min / max): -55°C / +250°C
Humidity (max): <=95% [at 60 deg C /140 F]
Vibration: 15 g [10 Hz - 2000 Hz]
Shock Resistance: 100 g [ 6 ms]
Salt Spray Corrosion: >1000 hr
Climatical Category: 50/175/21
Shielding (min): 75 dB (10 MHz)
Shielding (min): 40 dB (1 GHz)
IP Rating: 50
DRAWINGS
Draws
Dimensions
A
mm.
in.
15
0,59
L
49
1,93
M
37
1,46
S1
13
0,51
S2
12
0,47
LEMO products and services are provided “as is”. LEMO makes no warranties or representations with regard to LEMO product & services or use of
them, express, implied or statutory, including for accuracy, completeness, or security. The user is fully responsible for his products and applications
using LEMO components.
2/3
RECOMMENDED BY LEMO
Tools
Spanner wrench: MTZ.2B.220.120
Caps: BFG.2B.100.PCSG
Cables
012 050
PVC
Black
LEMO products and services are provided “as is”. LEMO makes no warranties or representations with regard to LEMO product & services or use of
them, express, implied or statutory, including for accuracy, completeness, or security. The user is fully responsible for his products and applications
I would like to ask what does Ground plane removed under Vin- mean in this picture? Does it mean that V- should be separated when laying ground in PCB design? Why should it be separated?...
USB audio solution, USB sound card solution1. Product description
ATE1133 is a chip that includes an audio codec, a HIFI-level single microphone input, and a stereo headphone output solution. It integ...
Welcome the New Year, everyone has a happy New Year~ I am here to report to the admin~ I started working today~ After the New Year, what new developments are there in the evaluation industry? Let's ta...
The NTC on the expansion board is connected to the A0 interface of the development board, which corresponds to the PA3 pin, the ADC of the 8th channel.
This time we use the ADC_MultiChannelSingleConve...
[i=s]This post was last edited by littleshrimp on 2019-7-27 13:35[/i]First go to the ST open source sensor driver center to download the corresponding Standard C driver
https://github.com/STMicroelect...
PCB Design
京公网安备 11010802033920号
EEWORLD
